This patch add support for Marvell GTI watchdog. Global timer
unit (GTI) support hardware watchdog timer. Software programs
watchdog timer to generate interrupt on first timeout, second
timeout is configured to be ignored and system reboots on
third timeout.
Signed-off-by: Bharat Bhushan <bbhushan2@xxxxxxxxxxx>
---
v9:
- include header files is alphabetic order
- using BIT_ULL for bit shifts in macros
- using devm_clk_get_enabled() rather than
devm_clk_get() and clk_prepare_enable()
- compatibles as per dt-binding changes
v8:
- Compatible names as per soc names
- This driver run on ARM64 based architecture, Added 64BIT config
dependency to avoid compilation error related to readq/writeq on
32 as platform (Hexagon)
drivers/watchdog/Kconfig | 13 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/marvell_gti_wdt.c | 339 +++++++++++++++++++++++++++++
3 files changed, 353 insertions(+)
create mode 100644 drivers/watchdog/marvell_gti_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index f22138709bf5..bbdc20f33dbf 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1779,6 +1779,19 @@ config OCTEON_WDT
from the first interrupt, it is then only poked when the
device is written.
+config MARVELL_GTI_WDT
+ tristate "Marvell GTI Watchdog driver"
+ depends on ARCH_THUNDER || (COMPILE_TEST && 64BIT)
+ default y
+ select WATCHDOG_CORE
+ help
+ Marvell GTI hardware supports watchdog timer. First timeout
+ works as watchdog pretimeout and installed interrupt handler
+ will be called on first timeout. Hardware can generate interrupt
+ to SCP on second timeout but it is not enabled, So second
+ timeout is ignored. If device poke does not happen then system
+ will reboot on third timeout.
+
config BCM2835_WDT
tristate "Broadcom BCM2835 hardware watchdog"
depends on ARCH_BCM2835 || (OF && COMPILE_TEST)
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index b4c4ccf2d703..a164cd161ef3 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -98,6 +98,7 @@ obj-$(CONFIG_VISCONTI_WATCHDOG) += visconti_wdt.o
obj-$(CONFIG_MSC313E_WATCHDOG) += msc313e_wdt.o
obj-$(CONFIG_APPLE_WATCHDOG) += apple_wdt.o
obj-$(CONFIG_SUNPLUS_WATCHDOG) += sunplus_wdt.o
+obj-$(CONFIG_MARVELL_GTI_WDT) += marvell_gti_wdt.o
# X86 (i386 + ia64 + x86_64) Architecture
obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
diff --git a/drivers/watchdog/marvell_gti_wdt.c b/drivers/watchdog/marvell_gti_wdt.c
new file mode 100644
index 000000000000..68b9b20f6816
--- /dev/null
+++ b/drivers/watchdog/marvell_gti_wdt.c
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell GTI Watchdog driver
+ *
+ * Copyright (C) 2023 Marvell.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+/*
+ * Hardware supports following mode of operation:
+ * 1) Interrupt Only:
+ * This will generate the interrupt to arm core whenever timeout happens.
+ *
+ * 2) Interrupt + del3t (Interrupt to firmware (SCP processor)).
+ * This will generate interrupt to arm core on 1st timeout happens
+ * This will generate interrupt to SCP processor on 2nd timeout happens
+ *
+ * 3) Interrupt + Interrupt to SCP processor (called delt3t) + reboot.
+ * This will generate interrupt to arm core on 1st timeout happens
+ * Will generate interrupt to SCP processor on 2nd timeout happens,
+ * if interrupt is configured.
+ * Reboot on 3rd timeout.
+ *
+ * Driver will use hardware in mode-3 above so that system can reboot in case
+ * a hardware hang. Also h/w is configured not to generate SCP interrupt, so
+ * effectively 2nd timeout is ignored within hardware.
+ *
+ * First timeout is effectively watchdog pretimeout.
+ */
+
+/* GTI CWD Watchdog (GTI_CWD_WDOG) Register */
+#define GTI_CWD_WDOG(reg_offset) (0x8 * (reg_offset))
+#define GTI_CWD_WDOG_MODE_INT_DEL3T_RST 0x3
+#define GTI_CWD_WDOG_MODE_MASK GENMASK_ULL(1, 0)
+#define GTI_CWD_WDOG_LEN_SHIFT 4
+#define GTI_CWD_WDOG_LEN_MASK GENMASK_ULL(19, 4)
+#define GTI_CWD_WDOG_CNT_SHIFT 20
+#define GTI_CWD_WDOG_CNT_MASK GENMASK_ULL(43, 20)
+
+/* GTI CWD Watchdog Interrupt (GTI_CWD_INT) Register */
+#define GTI_CWD_INT 0x200
+#define GTI_CWD_INT_PENDING_STATUS(bit) BIT_ULL(bit)
+
+/* GTI CWD Watchdog Interrupt Enable Clear (GTI_CWD_INT_ENA_CLR) Register */
+#define GTI_CWD_INT_ENA_CLR 0x210
+#define GTI_CWD_INT_ENA_CLR_VAL(bit) BIT_ULL(bit)
+
+/* GTI CWD Watchdog Interrupt Enable Set (GTI_CWD_INT_ENA_SET) Register */
+#define GTI_CWD_INT_ENA_SET 0x218
+#define GTI_CWD_INT_ENA_SET_VAL(bit) BIT_ULL(bit)
+
+/* GTI CWD Watchdog Poke (GTI_CWD_POKE) Registers */
+#define GTI_CWD_POKE(reg_offset) (0x10000 + 0x8 * (reg_offset))
+#define GTI_CWD_POKE_VAL 1
+
+struct gti_match_data {
+ u32 gti_num_timers;
+};
+
+static const struct gti_match_data match_data_octeontx2 = {
+ .gti_num_timers = 54,
+};
+
+static const struct gti_match_data match_data_cn10k = {
+ .gti_num_timers = 64,
+};
+
+struct gti_wdt_priv {
+ struct watchdog_device wdev;
+ void __iomem *base;
+ u32 clock_freq;
+ struct clk *sclk;
+ /* wdt_timer_idx used for timer to be used for system watchdog */
+ u32 wdt_timer_idx;
+ const struct gti_match_data *data;
+};
+
+static irqreturn_t gti_wdt_interrupt(int irq, void *data)
+{
+ struct watchdog_device *wdev = data;
+ struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
+
+ /* Clear Interrupt Pending Status */
+ writeq(GTI_CWD_INT_PENDING_STATUS(priv->wdt_timer_idx),
+ priv->base + GTI_CWD_INT);
+
+ watchdog_notify_pretimeout(wdev);
+
+ return IRQ_HANDLED;
+}
+
+static int gti_wdt_ping(struct watchdog_device *wdev)
+{
+ struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
+
+ writeq(GTI_CWD_POKE_VAL,
+ priv->base + GTI_CWD_POKE(priv->wdt_timer_idx));
+
+ return 0;
+}
+
+static int gti_wdt_start(struct watchdog_device *wdev)
+{
+ struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
+ u64 regval;
+
+ if (!wdev->pretimeout)
+ return -EINVAL;
+
+ set_bit(WDOG_HW_RUNNING, &wdev->status);
+
+ /* Clear any pending interrupt */
+ writeq(GTI_CWD_INT_PENDING_STATUS(priv->wdt_timer_idx),
+ priv->base + GTI_CWD_INT);
+
+ /* Enable Interrupt */
+ writeq(GTI_CWD_INT_ENA_SET_VAL(priv->wdt_timer_idx),
+ priv->base + GTI_CWD_INT_ENA_SET);
+
+ /* Set (Interrupt + SCP interrupt (DEL3T) + core domain reset) Mode */
+ regval = readq(priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
+ regval |= GTI_CWD_WDOG_MODE_INT_DEL3T_RST;
+ writeq(regval, priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
+
+ return 0;
+}
+
+static int gti_wdt_stop(struct watchdog_device *wdev)
+{
+ struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
+ u64 regval;
+
+ /* Disable Interrupt */
+ writeq(GTI_CWD_INT_ENA_CLR_VAL(priv->wdt_timer_idx),
+ priv->base + GTI_CWD_INT_ENA_CLR);
+
+ /* Set GTI_CWD_WDOG.Mode = 0 to stop the timer */
+ regval = readq(priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
+ regval &= ~GTI_CWD_WDOG_MODE_MASK;
+ writeq(regval, priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
+
+ return 0;
+}
+
+static int gti_wdt_settimeout(struct watchdog_device *wdev,
+ unsigned int timeout)
+{
+ struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
+ u64 timeout_wdog, regval;
+
+ /* Update new timeout */
+ wdev->timeout = timeout;
+
+ /* Pretimeout is 1/3 of timeout */
+ wdev->pretimeout = timeout / 3;
+
+ /* Get clock cycles from pretimeout */
+ timeout_wdog = (u64)priv->clock_freq * wdev->pretimeout;
+
+ /* Watchdog counts in 1024 cycle steps */
+ timeout_wdog = timeout_wdog >> 10;
+
+ /* GTI_CWD_WDOG.CNT: reload counter is 16-bit */
+ timeout_wdog = (timeout_wdog + 0xff) >> 8;
+ if (timeout_wdog >= 0x10000)
+ timeout_wdog = 0xffff;
+
+ /*
+ * GTI_CWD_WDOG.LEN is 24bit, lower 8-bits should be zero and
+ * upper 16-bits are same as GTI_CWD_WDOG.CNT
+ */
+ regval = readq(priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
+ regval &= GTI_CWD_WDOG_MODE_MASK;
+ regval |= (timeout_wdog << (GTI_CWD_WDOG_CNT_SHIFT + 8)) |
+ (timeout_wdog << GTI_CWD_WDOG_LEN_SHIFT);
+ writeq(regval, priv->base + GTI_CWD_WDOG(priv->wdt_timer_idx));
+
+ return 0;
+}
+
+static int gti_wdt_set_pretimeout(struct watchdog_device *wdev,
+ unsigned int timeout)
+{
+ struct gti_wdt_priv *priv = watchdog_get_drvdata(wdev);
+ struct watchdog_device *wdog_dev = &priv->wdev;
+
+ /* pretimeout should 1/3 of max_timeout */
+ if (timeout * 3 <= wdog_dev->max_timeout)
+ return gti_wdt_settimeout(wdev, timeout * 3);
+
+ return -EINVAL;
+}
+
+static void gti_clk_disable_unprepare(void *data)
+{
+ clk_disable_unprepare(data);
+}
+
+static int gti_wdt_get_cntfrq(struct platform_device *pdev,
+ struct gti_wdt_priv *priv)
+{
+ int err;
+
+ priv->sclk = devm_clk_get_enabled(&pdev->dev, NULL);
+ if (IS_ERR(priv->sclk))
+ return PTR_ERR(priv->sclk);
+
+ err = devm_add_action_or_reset(&pdev->dev,
+ gti_clk_disable_unprepare, priv->sclk);
+ if (err)
+ return err;
+
+ priv->clock_freq = clk_get_rate(priv->sclk);
+ if (!priv->clock_freq)
+ return -EINVAL;
+
+ return 0;
+}
+
+static const struct watchdog_info gti_wdt_ident = {
+ .identity = "Marvell GTI watchdog",
+ .options = WDIOF_SETTIMEOUT | WDIOF_PRETIMEOUT | WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE | WDIOF_CARDRESET,
+};
+
+static const struct watchdog_ops gti_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = gti_wdt_start,
+ .stop = gti_wdt_stop,
+ .ping = gti_wdt_ping,
+ .set_timeout = gti_wdt_settimeout,
+ .set_pretimeout = gti_wdt_set_pretimeout,
+};
+
+static int gti_wdt_probe(struct platform_device *pdev)
+{
+ struct gti_wdt_priv *priv;
+ struct device *dev = &pdev->dev;
+ struct watchdog_device *wdog_dev;
+ u64 max_pretimeout;
+ u32 wdt_idx;
+ int irq;
+ int err;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return dev_err_probe(&pdev->dev, PTR_ERR(priv->base),
+ "reg property not valid/found\n");
+
+ err = gti_wdt_get_cntfrq(pdev, priv);
+ if (err)
+ return dev_err_probe(&pdev->dev, err,
+ "GTI clock frequency not valid/found");
+
+ priv->data = of_device_get_match_data(dev);
+
+ /* default use last timer for watchdog */
+ priv->wdt_timer_idx = priv->data->gti_num_timers - 1;
+
+ err = of_property_read_u32(dev->of_node, "marvell,wdt-timer-index",
+ &wdt_idx);
+ if (!err) {
+ if (wdt_idx >= priv->data->gti_num_timers)
+ return dev_err_probe(&pdev->dev, err,
+ "GTI wdog timer index not valid");
+
+ priv->wdt_timer_idx = wdt_idx;
+ }
+
+ wdog_dev = &priv->wdev;
+ wdog_dev->info = >i_wdt_ident,
+ wdog_dev->ops = >i_wdt_ops,
+ wdog_dev->parent = dev;
+ /*
+ * Watchdog counter is 24 bit where lower 8 bits are zeros
+ * This counter decrements every 1024 clock cycles.
+ */
+ max_pretimeout = (GTI_CWD_WDOG_CNT_MASK >> GTI_CWD_WDOG_CNT_SHIFT);
+ max_pretimeout &= ~0xFFUL;
+ max_pretimeout = (max_pretimeout * 1024) / priv->clock_freq;
+ wdog_dev->pretimeout = max_pretimeout;
+
+ /* Maximum timeout is 3 times the pretimeout */
+ wdog_dev->max_timeout = max_pretimeout * 3;
+ /* Minimum first timeout (pretimeout) is 1, so min_timeout as 3 */
+ wdog_dev->min_timeout = 3;
+ wdog_dev->timeout = wdog_dev->pretimeout;
+
+ watchdog_set_drvdata(wdog_dev, priv);
+ platform_set_drvdata(pdev, priv);
+ gti_wdt_settimeout(wdog_dev, wdog_dev->timeout);
+ watchdog_stop_on_reboot(wdog_dev);
+ watchdog_stop_on_unregister(wdog_dev);
+
+ err = devm_watchdog_register_device(dev, wdog_dev);
+ if (err)
+ return err;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return dev_err_probe(&pdev->dev, irq, "IRQ resource not found\n");
+
+ err = devm_request_irq(dev, irq, gti_wdt_interrupt, 0,
+ pdev->name, &priv->wdev);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to register interrupt handler\n");
+
+ dev_info(dev, "Watchdog enabled (timeout=%d sec)\n", wdog_dev->timeout);
+ return 0;
+}
+
+static const struct of_device_id gti_wdt_of_match[] = {
+ { .compatible = "marvell,cn9670-wdt", .data = &match_data_octeontx2},
+ { .compatible = "marvell,cn10624-wdt", .data = &match_data_cn10k},
+ { },
+};
+MODULE_DEVICE_TABLE(of, gti_wdt_of_match);
+
+static struct platform_driver gti_wdt_driver = {
+ .driver = {
+ .name = "gti-wdt",
+ .of_match_table = gti_wdt_of_match,
+ },
+ .probe = gti_wdt_probe,
+};
+module_platform_driver(gti_wdt_driver);
+
+MODULE_AUTHOR("Bharat Bhushan <bbhushan2@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Marvell GTI watchdog driver");
--
2.17.1
