In continuation of patch series posted by Nishanth for sync of uboot device tree with kernel device tree for AM64 SOC. https://lore.kernel.org/linux-arm-kernel/20230414073328.381336-1-nm@xxxxxx/ This series extend device tree sync/clean up for J7200 SOC. This patch series build on top of https://lore.kernel.org/all/20230419040007.3022780-1-u-kumar1@xxxxxx Changes since v2: https://lore.kernel.org/all/20230601093744.1565802-1-u-kumar1@xxxxxx/ * Configure pinctrl for timer IO pads Added reviewed by Tony Lindgren * Add uart pin mux in main_pmx0 Changed subject of patch Changes since v1: https://lore.kernel.org/all/20230426103219.1565266-1-u-kumar1@xxxxxx/ * Add general purpose timers: Addded CLKSEL_VD clock for odd numbered timers Marked MCU_Timer as reserved, fixed clock index for main_timer13 *Configure pinctrl for timer IO pads Marked mcu_timerio_input as reserved *main_pmx0 clean up Splitted into two patches, One for UART and second for i2c duplication removal *Add uart pin mux in wkup_pmx0 No change *Add bootph-pre-ram for u-boot patch dropped, later will add bootph-pre-ram property later for all nodes. Udit Kumar (5): arm64: dts: ti: k3-j7200: Add general purpose timers arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads arm64: dts: ti: k3-j7200-common-proc-board: Add uart pin mux in main_pmx0 arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux arm64: dts: ti: k3-j7200-common-proc-board: Add uart pin mux in wkup_pmx0 .../dts/ti/k3-j7200-common-proc-board.dts | 32 ++- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 258 ++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 150 ++++++++++ 3 files changed, 436 insertions(+), 4 deletions(-) -- 2.34.1
