net: phy: realtek: Support external PHY clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Subject: net: phy: realtek: Support external PHY clock
From: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
Date: Fri, 2 Jun 2023 14:26:56 -0400
Cc: Andrew Lunn <andrew@xxxxxxx>, Heiner Kallweit <hkallweit1@xxxxxxxxx>, Russell King <linux@xxxxxxxxxxxxxxx>, "David S . Miller" <davem@xxxxxxxxxxxxx>, Eric Dumazet <edumazet@xxxxxxxxxx>, Jakub Kicinski <kuba@xxxxxxxxxx>, Paolo Abeni <pabeni@xxxxxxxxxx>, Rob Herring <robh+dt@xxxxxxxxxx>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>, Conor Dooley <conor+dt@xxxxxxxxxx>, Florian Fainelli <f.fainelli@xxxxxxxxx>, netdev@xxxxxxxxxxxxxxx, devicetree@xxxxxxxxxxxxxxx

Hi, thank you for your comments ! HEre are the changes that were
discussed.

Some PHYs can use an external clock that must be enabled before probing
it.

Changes since v1:
 * Remove the clock name as it is not guaranteed to be identical across
   different PHYs
 * Disable/Enable the clock when suspending/resuming

Follow-Ups:
- [PATCH v2 3/3] net: phy: realtek: Disable clock on suspend
  - From: Detlev Casanova
- [PATCH v2 2/3] dt-bindings: net: phy: Document support for external PHY clk
  - From: Detlev Casanova
- [PATCH v2 1/3] net: phy: realtek: Add optional external PHY clock
  - From: Detlev Casanova

Prev by Date: Re: [PATCH 1/9] dt-bindings: display: Add yamls for JH7110 display subsystem
Next by Date: [PATCH v2 1/3] net: phy: realtek: Add optional external PHY clock
Previous by thread: [PATCH] arm64: dts: qcom: sdm845-db845c: Move LVS regulator nodes up
Next by thread: [PATCH v2 1/3] net: phy: realtek: Add optional external PHY clock
Index(es):
- Date
- Thread

[Index of Archives] [Device Tree Compilter] [Device Tree Spec] [Linux Driver Backports] [Video for Linux] [Linux USB Devel] [Linux PCI Devel] [Linux Audio Users] [Linux Kernel] [Linux SCSI] [XFree86] [Yosemite Backpacking]

Powered by Linux