Re: [PATCH RESEND 4/4] arm64: dts: qcom: ipq5332: add support for the RDP474 variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6/1/2023 10:59 PM, Krzysztof Kozlowski wrote:
On 01/06/2023 06:20, Kathiravan T wrote:
Add the initial device tree support for the Reference Design
Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
the support for Console UART, eMMC, I2C and GPIO based buttons.

Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/Makefile           |   1 +
  arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts | 112 ++++++++++++++++++++
  2 files changed, 113 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4f9e81253e18..0f8c763a9bd9 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
new file mode 100644
index 000000000000..085729a0fdf1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 RDP474 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "ipq5332.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9";
+	compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332";
+
+	aliases {
+		serial0 = &blsp1_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio_keys {
No, srsly, so not only ignored the tags but also feedback?


Please correct me if I am wrong here..

This is RESEND of V1 patches (only minor correction in the subject line in cover letter). Also I don't see review comments as such in original V1 as well https://lore.kernel.org/linux-arm-msm/20230531135048.19164-1-quic_kathirav@xxxxxxxxxxx/

Can you help to point out your review comments, I couldn't able to find out.

Thanks,



Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux