Re: [PATCH RESEND 4/4] arm64: dts: qcom: ipq5332: add support for the RDP474 variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/06/2023 06:20, Kathiravan T wrote:
> Add the initial device tree support for the Reference Design
> Platform(RDP) 474 based on IPQ5332 family of SoC. This patch carries
> the support for Console UART, eMMC, I2C and GPIO based buttons.
> 
> Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile           |   1 +
>  arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts | 112 ++++++++++++++++++++
>  2 files changed, 113 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 4f9e81253e18..0f8c763a9bd9 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
> new file mode 100644
> index 000000000000..085729a0fdf1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
> @@ -0,0 +1,112 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * IPQ5332 RDP474 board device tree source
> + *
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "ipq5332.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9";
> +	compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332";
> +
> +	aliases {
> +		serial0 = &blsp1_uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0";
> +	};
> +
> +	gpio_keys {

No, srsly, so not only ignored the tags but also feedback?

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux