On Thu, 1 Jun 2023 13:55:03 +0100 Mark Brown <broonie@xxxxxxxxxx> wrote: > On Thu, Jun 01, 2023 at 03:41:54PM +0300, Nikita Shubin wrote: > > Mark Brown <broonie@xxxxxxxxxx> wrote: > > > On Thu, Jun 01, 2023 at 08:34:08AM +0300, Nikita Shubin wrote: > > > > > + cirrus,ep9301-use-dma: > > > > + description: Flag indicating that the SPI should use dma > > > > + type: boolean > > > > My previous feedback on this property still applies. > > > > > + cirrus,ep9301-use-dma: > > > The reason is that ep93xx DMA state is not quite device-tree ready > > at this moment, and clients use it with the help of: > > > https://elixir.bootlin.com/linux/v6.4-rc4/source/include/linux/platform_data/dma-ep93xx.h > > > > > I was hoping to slip by without changing much in ep93xx DMA driver, > > so > > You're definign new ABI here, that's not a good thing to do for a > temporary workaround. > > > I can move "use-dma" to module parameters, if this is acceptable. > > That's less bad. I guess you could also define the bindings for the > DMA controller so that the properties are there then instead of > properly using the DMA API in the clients just check to see if the > DMA properties are present and then proceed accordingly? This sounds like a way to go. Thank you, Mark!
