Re: [PATCH v2 12/12] dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 30, 2023 at 03:08:48PM +0200, Krzysztof Kozlowski wrote:
> > diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> > index 5fd8fc604261..eed12687b0c9 100644
> > --- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> > +++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> > @@ -21,6 +21,10 @@ properties:
> >        - enum:
> >            - fsl,vf610-edma
> >            - fsl,imx7ulp-edma
> > +          - fsl,imx8qm-edma
> > +          - fsl,imx8qm-adma
> > +          - fsl,imx93-edma3
> > +          - fsl,imx93-edma4
> 
> What are these last two? What is "3" and "4"?

imx93 edma have two version, edma3(AHB) and edma4(AXI).
There are little bit difference at channel space size.

+static struct fsl_edma_drvdata imx93_data3 = {
+	.version = v3,
+	.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_DMACLK,
+	.chreg_space_sz = 0x10000,
+	.chreg_off = 0x10000,
+	.setup_irq = fsl_edma3_irq_init,
+};
+
+static struct fsl_edma_drvdata imx93_data4 = {
+	.version = v4,
+	.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_DMACLK,
+	.chreg_space_sz = 0x8000,
+	.chreg_off = 0x10000,
+	.setup_irq = fsl_edma3_irq_init,
+};

> 
> >        - items:
> >            - const: fsl,ls1028a-edma
> >            - const: fsl,vf610-edma
> > @@ -101,6 +105,22 @@ allOf:
> >          reg:
> >            maxItems: 2
> >  
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            anyOf:
> > +              - const: fsl,imx8qm-edma
> > +              - const: fsl,imx8qm-adma
> > +              - const: fsl,imx93-edma3
> > +              - const: fsl,imx93-edma4
> > +    then:
> > +      properties:
> > +        reg:
> > +          maxItems: 1
> > +        interrupts:
> > +          maxItems: 64
> 
> That's odd. What about the names? What about minItems? Anyway, this
> wasn't tested - you will have failures with dtbs_check.

It passed dtbs_check. interrupt-names is optional property, which
will no used after edma v3.

Planned dts look like:

+                       edma1: dma-controller@44000000{
+                               compatible = "fsl,imx93-edma3";
+                               reg = <0x44000000 0x200000>;
+                               #dma-cells = <3>;
+                               dma-channels = <31>;
+                               interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
						....
+			};



> 
> 
> 
> Best regards,
> Krzysztof
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux