The imx6qp-prtwd3 board supports USB over current detection on the USB
OTG port, however, it was previously disabled in the device tree. This
commit enables the over current detection by changing the device tree
setting from 'disable-over-current' to 'over-current-active-low'. This
could potentially protect the USB port from damage due to over current
situations.
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6qp-prtwd3.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts
index a8154c901d4f..657d112ac3a1 100644
--- a/arch/arm/boot/dts/imx6qp-prtwd3.dts
+++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts
@@ -518,7 +518,7 @@ &usbotg {
pinctrl-0 = <&pinctrl_usbotg>;
phy_type = "utmi";
dr_mode = "host";
- disable-over-current;
+ over-current-active-low;
status = "okay";
};
--
2.39.2
