This patchset consists of several updates that address issues on
Protonic Holland's supported i.MX6-based devices, with a particular
focus on the USB subsystem configuration, thermal zones, and the naming
of GPIO keys. Some of these changes include the activation of USB over-
current detection on certain ports, the disabling of unused USB PHY
nodes, fixing USB-related warnings, adding trip points to thermal zones
on several devices, and renaming the 'power' key to meet the necessary
conventions.
David Jander (1):
ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion
Oleksij Rempel (11):
ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG
node
ARM: dts: imx6dl: Add trip points to thermal zones on several devices
ARM: dts: imx6dl: vicut1: Address USB related warnings
ARM: dts: imx6dl: alti6p: fix different USB related warnings
ARM: dts: imx6dl: prtmvt: fix different USB related warnings
ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG
port
ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG
port
ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG
port
ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related
warnings
ARM: dts: imx6qdl: vicut1: rename power to power-button
Robin van der Gracht (3):
ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and
MDC
arch/arm/boot/dts/imx6dl-alti6p.dts | 10 +++++++
arch/arm/boot/dts/imx6dl-lanmcu.dts | 9 +++++++
arch/arm/boot/dts/imx6dl-plybas.dts | 2 +-
arch/arm/boot/dts/imx6dl-plym2m.dts | 24 +++++++++++++++++
arch/arm/boot/dts/imx6dl-prtmvt.dts | 11 +++++++-
arch/arm/boot/dts/imx6dl-prtrvt.dts | 4 +++
arch/arm/boot/dts/imx6dl-prtvt7.dts | 28 +++++++++++++++++---
arch/arm/boot/dts/imx6dl-victgo.dts | 24 +++++++++++++++++
arch/arm/boot/dts/imx6q-prtwd2.dts | 3 ---
arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 11 +++++++-
arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 19 +++++++++++--
arch/arm/boot/dts/imx6qp-prtwd3.dts | 2 +-
arch/arm/boot/dts/imx6ul-prti6g.dts | 1 +
14 files changed, 137 insertions(+), 13 deletions(-)
--
2.39.2
