On Sun, May 28, 2023 at 10:27 AM Adam Ford <aford173@xxxxxxxxx> wrote: > > In the event a device is connected to the samsung-dsim > controller that doesn't support the burst-clock, the > driver is able to get the requested pixel clock from the > attached device or bridge. In these instances, the > samsung,burst-clock-frequency isn't needed, so remove > it from the required list. > > The pll-clock frequency can be set by the device tree entry > for samsung,pll-clock-frequency, but in some cases, the > pll-clock may have the same clock rate as sclk_mipi clock. > If they are equal, this flag is not needed since the driver > will use the sclk_mipi rate as a fallback. > > Signed-off-by: Adam Ford <aford173@xxxxxxxxx> > Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > --- > V2: Split from driver series. Re-word updates for burst > and pll-clock frequency. Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx>
