Re: [PATCH 3/4] arm64: dts: qcom: msm8996: Improve GPU OPP table

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 30.03.2023 12:57, Konrad Dybcio wrote:
> 
> 
> On 29.03.2023 23:32, Dmitry Baryshkov wrote:
>> On Wed, 29 Mar 2023 at 22:17, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>>>
>>> Remove the self-explanatory comment about opp-supported-hw contents,
>>> add required-opps to ensure reasonable power domain levels are voted
>>> for (currently we've been piggybacking off of miracles and MDP votes)
>>> and add newlines between each subnode.
>>
>> I'm not sure this is 100% correct. The values that you add are correct
>> for the voltage scaling case. However, based on the vendor kernel
>> sources I think that MX should only be scaled if the voltage is scaled
>> too. I might be wrong here.
> MX must be >= CX (and GX), so this should bring no harm.
> 
> (citation needed, but that seems to hold true..)
With that in mind, would you ack these patches Dmitry?

Konrad
> 
> Konrad
>>
>>>
>>> Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>>> ---
>>>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 18 +++++++++++++-----
>>>  1 file changed, 13 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
>>> index 4dd37f72e018..62ad30e94f40 100644
>>> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
>>> @@ -1244,37 +1244,45 @@ gpu: gpu@b00000 {
>>>                         gpu_opp_table: opp-table {
>>>                                 compatible = "operating-points-v2";
>>>
>>> -                               /*
>>> -                                * 624Mhz is only available on speed bins 0 and 3.
>>> -                                * 560Mhz is only available on speed bins 0, 2 and 3.
>>> -                                * All the rest are available on all bins of the hardware.
>>> -                                */
>>>                                 opp-624000000 {
>>>                                         opp-hz = /bits/ 64 <624000000>;
>>> +                                       required-opps = <&rpmpd_opp_turbo>;
>>>                                         opp-supported-hw = <0x09>;
>>>                                 };
>>> +
>>>                                 opp-560000000 {
>>>                                         opp-hz = /bits/ 64 <560000000>;
>>> +                                       required-opps = <&rpmpd_opp_turbo>;
>>>                                         opp-supported-hw = <0x0d>;
>>>                                 };
>>> +
>>>                                 opp-510000000 {
>>>                                         opp-hz = /bits/ 64 <510000000>;
>>> +                                       required-opps = <&rpmpd_opp_nom>;
>>>                                         opp-supported-hw = <0xff>;
>>>                                 };
>>> +
>>>                                 opp-401800000 {
>>>                                         opp-hz = /bits/ 64 <401800000>;
>>> +                                       required-opps = <&rpmpd_opp_nom>;
>>>                                         opp-supported-hw = <0xff>;
>>>                                 };
>>> +
>>>                                 opp-315000000 {
>>>                                         opp-hz = /bits/ 64 <315000000>;
>>> +                                       required-opps = <&rpmpd_opp_svs>;
>>>                                         opp-supported-hw = <0xff>;
>>>                                 };
>>> +
>>>                                 opp-214000000 {
>>>                                         opp-hz = /bits/ 64 <214000000>;
>>> +                                       required-opps = <&rpmpd_opp_svs>;
>>>                                         opp-supported-hw = <0xff>;
>>>                                 };
>>> +
>>>                                 opp-133000000 {
>>>                                         opp-hz = /bits/ 64 <133000000>;
>>> +                                       required-opps = <&rpmpd_opp_svs>;
>>>                                         opp-supported-hw = <0xff>;
>>>                                 };
>>>                         };
>>>
>>> --
>>> 2.40.0
>>>
>>
>>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux