Add documentation of device tree in YAML schema for the ALVIUM Camera from Allied Vision Inc. References: - https://www.alliedvision.com/en/products/embedded-vision-solutions Signed-off-by: Tommaso Merciai <tomm.merciai@xxxxxxxxx> --- .../media/i2c/alliedvision,alvium.yaml | 117 ++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml new file mode 100644 index 000000000000..5385fe849ffd --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/alliedvision,alvium.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Alliedvision Alvium Camera + +maintainers: + - Tommaso Merciai <tomm.merciai@xxxxxxxxx> + - Martin Hecht <martin.hecht@xxxxxxxx> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: alliedvision,alvium + + reg: + maxItems: 1 + + clocks: + description: XCLK Input Clock + + clock-names: + const: xclk + + powerdown-gpios: + maxItems: 1 + description: > + Reference to the GPIO connected to the powerdown pin, if any. + + reset-gpios: + maxItems: 1 + description: > + Reference to the GPIO connected to the reset pin, if any. + + streamon-delay: + maxItems: 1 + description: > + Delay before camera start capturing frames in us. + + rotation: + enum: + - 0 + - 180 + + port: + description: Digital Output Port + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + const: 0 + data-lanes: + minItems: 1 + maxItems: 4 + items: + enum: [1, 4] + link-frequencies: true + + required: + - data-lanes + - link-frequencies + +required: + - compatible + - reg + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6qdl-clock.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera: alvium@3c { + compatible = "alliedvision,alvium"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csi0_pwn>, <&pinctrl_csi0_rst>, <&pinctrl_csi_mclk>; + clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO2>; + clock-names = "xclk"; + assigned-clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO2>; + assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + assigned-clock-rates = <24000000>; + streamon-delay = <20>; + powerdown-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + status = "okay"; + + port { + alvium_out: endpoint { + remote-endpoint = <&mipi_csi_0_in>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <681250000>; + clock-lanes = <0>; + }; + }; + }; + }; + +... -- 2.34.1
