Hi Anshuman
Please find a minor issue with the clock handling below.
On 23/05/2023 05:45, Anshuman Khandual wrote:
Add support for handling MMIO based devices via platform driver. We need to
make sure that :
1) The APB clock, if present is enabled at probe and via runtime_pm ops
2) Use the ETM4x architecture or CoreSight architecture registers to
identify a device as CoreSight ETM4x, instead of relying a white list of
"Peripheral IDs"
The driver doesn't get to handle the devices yet, until we wire the ACPI
changes to move the devices to be handled via platform driver than the
etm4_amba driver.
Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
Cc: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
Cc: Mike Leach <mike.leach@xxxxxxxxxx>
Cc: Leo Yan <leo.yan@xxxxxxxxxx>
Cc: coresight@xxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Anshuman Khandual <anshuman.khandual@xxxxxxx>
---
.../coresight/coresight-etm4x-core.c | 57 ++++++++++++++++++-
drivers/hwtracing/coresight/coresight-etm4x.h | 4 ++
include/linux/coresight.h | 47 +++++++++++++++
3 files changed, 106 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index 57a7181017bd..c9e2219ee6b6 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -30,6 +30,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
+#include <linux/clk/clk-conf.h>
#include <asm/barrier.h>
#include <asm/sections.h>
@@ -1073,11 +1074,21 @@ static bool etm4_init_sysreg_access(struct etmv4_drvdata *drvdata,
return true;
}
+static bool is_devtype_cpu_trace(void __iomem *base)
+{
+ u32 devtype = readl(base + TRCDEVTYPE);
+
+ return (devtype == CS_DEVTYPE_PE_TRACE);
+}
+
static bool etm4_init_iomem_access(struct etmv4_drvdata *drvdata,
struct csdev_access *csa)
{
u32 devarch = readl_relaxed(drvdata->base + TRCDEVARCH);
+ if (!is_coresight_device(drvdata->base) || !is_devtype_cpu_trace(drvdata->base))
+ return false;
+
/*
* All ETMs must implement TRCDEVARCH to indicate that
* the component is an ETMv4. Even though TRCIDR1 also
@@ -2135,6 +2146,7 @@ static int etm4_probe_amba(struct amba_device *adev, const struct amba_id *id)
static int etm4_probe_platform_dev(struct platform_device *pdev)
{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct etmv4_drvdata *drvdata;
int ret;
@@ -2142,7 +2154,18 @@ static int etm4_probe_platform_dev(struct platform_device *pdev)
if (!drvdata)
return -ENOMEM;
- drvdata->base = NULL;
+ drvdata->pclk = coresight_get_enable_apb_pclk(&pdev->dev);
+ if (IS_ERR(drvdata->pclk))
+ return -ENODEV;
+
+ if (res) {
+ drvdata->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(drvdata->base)) {
+ clk_put(drvdata->pclk);
clk_put() can handle drvdata->pclk == NULL and bail out early. So
calling this without the != NULL check is fine.
+ return PTR_ERR(drvdata->base);
+ }
+ }
+
dev_set_drvdata(&pdev->dev, drvdata);
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
@@ -2188,7 +2211,7 @@ static struct amba_cs_uci_id uci_id_etm4[] = {
/* ETMv4 UCI data */
.devarch = ETM_DEVARCH_ETMv4x_ARCH,
.devarch_mask = ETM_DEVARCH_ID_MASK,
- .devtype = 0x00000013,
+ .devtype = CS_DEVTYPE_PE_TRACE,
}
};
@@ -2247,6 +2270,9 @@ static int __exit etm4_remove_platform_dev(struct platform_device *pdev)
if (drvdata)
ret = etm4_remove_dev(drvdata);
pm_runtime_disable(&pdev->dev);
+
+ if (drvdata->pclk)
+ clk_put(drvdata->pclk);
return ret;
}
@@ -2286,6 +2312,32 @@ static struct amba_driver etm4x_amba_driver = {
.id_table = etm4_ids,
};
+#ifdef CONFIG_PM
+static int etm4_runtime_suspend(struct device *dev)
+{
+ struct etmv4_drvdata *drvdata = dev_get_drvdata(dev);
+
+ if (!IS_ERR(drvdata->pclk))
+ clk_disable_unprepare(drvdata->pclk);
However this seems to be inconsistent. Should we not use:
if (drvdata->pclk)
...
+
+ return 0;
+}
+
+static int etm4_runtime_resume(struct device *dev)
+{
+ struct etmv4_drvdata *drvdata = dev_get_drvdata(dev);
+
+ if (!IS_ERR(drvdata->pclk))
same as above ?
+ clk_prepare_enable(drvdata->pclk);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops etm4_dev_pm_ops = {
+ SET_RUNTIME_PM_OPS(etm4_runtime_suspend, etm4_runtime_resume, NULL)
+};
+
static const struct of_device_id etm4_sysreg_match[] = {
{ .compatible = "arm,coresight-etm4x-sysreg" },
{ .compatible = "arm,embedded-trace-extension" },
@@ -2299,6 +2351,7 @@ static struct platform_driver etm4_platform_driver = {
.name = "coresight-etm4x",
.of_match_table = etm4_sysreg_match,
.suppress_bind_attrs = true,
+ .pm = &etm4_dev_pm_ops,
},
};
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index 27c8a9901868..0ff0bd2cd504 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -701,6 +701,8 @@
#define ETM_DEVARCH_ETE_ARCH \
(ETM_DEVARCH_ARCHITECT_ARM | ETM_DEVARCH_ARCHID_ETE | ETM_DEVARCH_PRESENT)
+#define CS_DEVTYPE_PE_TRACE 0x00000013
+
#define TRCSTATR_IDLE_BIT 0
#define TRCSTATR_PMSTABLE_BIT 1
#define ETM_DEFAULT_ADDR_COMP 0
@@ -944,6 +946,7 @@ struct etmv4_save_state {
/**
* struct etm4_drvdata - specifics associated to an ETM component
+ * @pclk APB clock for this component
Might be worth adding the comment here :
* @pclk: APB clock if present, otherwise NULL
Rest looks fine to me
Suzuki
