From: Fabio Estevam <festevam@xxxxxxx>
i.MX6SX has an LVDS controller that is connected to the eLCDIF.
Add support for it.
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
Dependency: This depends on bd60d98a11da ("dt-bindings: display: bridge: ldb: Adjust imx6sx entries"),
which is available on linux-next.
Changes since v6:
- Use simple-mfd.
arch/arm/boot/dts/imx6sx.dtsi | 42 +++++++++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 4233943a1cca..3a4308666552 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -841,10 +841,40 @@ iomuxc: pinctrl@20e0000 {
reg = <0x020e0000 0x4000>;
};
- gpr: iomuxc-gpr@20e4000 {
+ gpr: syscon@20e4000 {
compatible = "fsl,imx6sx-iomuxc-gpr",
- "fsl,imx6q-iomuxc-gpr", "syscon";
+ "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
reg = <0x020e4000 0x4000>;
+
+ lvds_bridge: bridge@18 {
+ compatible = "fsl,imx6sx-ldb";
+ reg = <0x18 0x4>;
+ clocks = <&clks IMX6SX_CLK_LDB_DI0>;
+ clock-names = "ldb";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ ldb_from_lcdif1: endpoint {
+ remote-endpoint = <&lcdif1_to_ldb>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ldb_lvds_ch0: endpoint {
+ };
+ };
+ };
+ };
};
sdma: dma-controller@20ec000 {
@@ -1278,6 +1308,14 @@ lcdif1: lcdif@2220000 {
clock-names = "pix", "axi", "disp_axi";
power-domains = <&pd_disp>;
status = "disabled";
+
+ ports {
+ port {
+ lcdif1_to_ldb: endpoint {
+ remote-endpoint = <&ldb_from_lcdif1>;
+ };
+ };
+ };
};
lcdif2: lcdif@2224000 {
--
2.34.1
