The MCP3564R is a 24-bit ADC with 8 multiplexed inputs. The MCP3561R is the same device with 2 inputs, the MCP3562R has 4 inputs. The device contains one ADC and a multiplexer to select the inputs to the ADC. Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx> --- .../bindings/iio/adc/microchip,mcp356xr.yaml | 84 +++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml new file mode 100644 index 000000000000..4aef166894c8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp356xr.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +# Copyright 2023 Topic Embedded Systems +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp356xr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP3561R/MCP3562R/MCP3564R ADC + +maintainers: + - Mike Looijmans <mike.looijmans@xxxxxxxx> + +description: | + Bindings for the Microchip MCP356xR 8-channel ADC devices. Datasheet and info + can be found at: https://www.microchip.com/en-us/product/MCP3564R + +properties: + compatible: + enum: + - microchip,mcp3561r + - microchip,mcp3562r + - microchip,mcp3564r + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 20000000 + + clocks: + description: + Phandle and clock identifier for external sampling clock. + If not specified, the internal crystal oscillator will be used. + maxItems: 1 + + interrupts: + description: IRQ line of the ADC + maxItems: 1 + + drive-open-drain: + description: + Whether to drive the IRQ signal as push-pull (default) or open-drain. Note + that the device requires this pin to become "high", otherwise it will stop + converting. + type: boolean + + microchip,device-addr: + description: Device address when multiple chips are present on the same bus. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 1 + + vref-supply: + description: + Phandle to the external reference voltage supply. + If not specified, the internal voltage reference (2.4V) will be used. + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "microchip,mcp3564r"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 2>; + spi-max-frequency = <20000000>; + microchip,device-addr = <1>; + vref-supply = <&vref_reg>; + clocks = <&xtal>; + }; + }; -- 2.17.1 Met vriendelijke groet / kind regards, Mike Looijmans System Expert TOPIC Embedded Products B.V. Materiaalweg 4, 5681 RJ Best The Netherlands T: +31 (0) 499 33 69 69 E: mike.looijmans@xxxxxxxxxxxxxxxxx W: www.topic.nl Please consider the environment before printing this e-mail
