USB0 is a Type-C port with dual data role and power sink. Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx> --- Changelog: v4: - Rebase on v6.4-rc2 - Drop interrupt patch as it will break Type-C role switch on older boards. v3: - include Type-C support for am62-lp-sk - split interrupts properties for Type-C chip into am625-sk v2: - rebase off [1] - add fixes tag to patch 1 [1] - https://lore.kernel.org/all/20230321-am62-lp-sk-v2-0-0a56e1694804@xxxxxx/ arch/arm64/boot/dts/ti/k3-am625-sk.dts | 2 +- .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 35 ++++++++++++++++++- 2 files changed, 35 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 2a1adda9bff6..729f95e19042 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -161,7 +161,7 @@ exp1: gpio@22 { "UART1_FET_BUF_EN", "WL_LT_EN", "GPIO_HDMI_RSTn", "CSI_GPIO1", "CSI_GPIO2", "PRU_3V3_EN", - "HDMI_INTn", "TEST_GPIO2", + "HDMI_INTn", "PD_I2C_IRQ", "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", "MCASP1_FET_SEL", "UART1_FET_SEL", "TSINT#", "IO_EXP_TEST_LED"; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 976f8303c84f..b6667c0ff826 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -242,6 +242,30 @@ &main_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; + + typec_pd0: tps6598x@3f { + compatible = "ti,tps6598x"; + reg = <0x3f>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + self-powered; + data-role = "dual"; + power-role = "sink"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_con_hs: endpoint { + remote-endpoint = <&usb0_hs_ep>; + }; + }; + }; + }; + }; }; &main_i2c1 { @@ -321,7 +345,16 @@ &usbss1 { }; &usb0 { - dr_mode = "peripheral"; + #address-cells = <1>; + #size-cells = <0>; + usb-role-switch; + + port@0 { + reg = <0>; + usb0_hs_ep: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; }; &usb1 { -- 2.34.1
