From: Fabio Estevam <festevam@xxxxxxx> The i.MX6SX General Purpose Registers is a set of register that serves various different purposes and in particular, IOMUXC_GPR_GPR6, at offset 0x18, can be used to configure the LDB block. Signed-off-by: Fabio Estevam <festevam@xxxxxxx> --- Changes since v5: - Dropped "fsl,imx6q-iomuxc-gpr" and "reg-names" (Marek). .../bindings/soc/imx/fsl,imx6sx-gpr.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx6sx-gpr.yaml diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx6sx-gpr.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx6sx-gpr.yaml new file mode 100644 index 000000000000..b9752b4c45ab --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx6sx-gpr.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx6sx-gpr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX6SX General Purpose Register + +maintainers: + - Fabio Estevam <festevam@xxxxxxx> + +description: + The i.MX6SX General Purpose Registers is a set of register that serves + for various purposes and in particular, IOMUXC_GPR_GPR6, at offset 0x18, + can be used to configure the LDB block. + +properties: + compatible: + items: + - const: fsl,imx6sx-iomuxc-gpr + - const: syscon + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + bridge@18: + type: object + $ref: /schemas/display/bridge/fsl,ldb.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx6sx-clock.h> + + syscon@20e4000 { + compatible = "fsl,imx6sx-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + + bridge@18 { + compatible = "fsl,imx6sx-ldb"; + reg = <0x18 0x4>; + clocks = <&clks IMX6SX_CLK_LDB_DI0>; + clock-names = "ldb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif1: endpoint { + remote-endpoint = <&lcdif1_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + }; + }; + }; + }; + }; +... -- 2.34.1
