[PATCH v6 1/5] PCI: imx6: Use a more specific i.MX6SX GPR compatible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Fabio Estevam <festevam@xxxxxxx>

On the i.MX6SX case, the more specific GPR (General Purpose
Register) compatible, "fsl,imx6sx-iomuxc-gpr", can be used instead
of the more generic "fsl,imx6q-iomuxc-gpr" one.

Switch to using the more specific i.MX6SX GPR compatible.

The motivation for this change is to allow the introduction of
i.MX6SX GPR driver that will be used to control the i.MX6SX LDB bridge.

Old DTBs are unaffected by this change.

Suggested-by: Marek Vasut <marex@xxxxxxx>
Signed-off-by: Fabio Estevam <festevam@xxxxxxx>
---
Changes since v5:
- Newly introduced.

 drivers/pci/controller/dwc/pci-imx6.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 52906f999f2b..4803e3c9ee37 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1460,7 +1460,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
 		.flags = IMX6_PCIE_FLAG_IMX6_PHY |
 			 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
 			 IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
-		.gpr = "fsl,imx6q-iomuxc-gpr",
+		.gpr = "fsl,imx6sx-iomuxc-gpr",
 	},
 	[IMX6QP] = {
 		.variant = IMX6QP,
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux