On Thu, May 18, 2023 at 12:37:57PM +0100, Srinivas Kandagatla wrote: > The LPASS(Low Power Audio Subsystem) Audio clock provider provides reset Missing space after "LPASS". Same comments as on previous patch seem to apply to the reset of the commit message. > controller support when is driven by the Q6DSP. > This patch adds support for those resets and adds IDs for clients > to request the reset. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > --- > .../bindings/clock/qcom,sc8280xp-lpasscc.yaml | 11 +++++++++++ > include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h | 5 +++++ > 2 files changed, 16 insertions(+) > > diff --git a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml > index 7c30614a0af9..394833819ba3 100644 > --- a/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml > +++ b/Documentation/devicetree/bindings/clock/qcom,sc8280xp-lpasscc.yaml > @@ -22,6 +22,7 @@ properties: > compatible: > enum: > - qcom,sc8280xp-lpasscc > + - qcom,sc8280xp-lpassaudiocc Add before lpasscc to maintain alphabetical sorting. > > '#reset-cells': > const: 1 > @@ -45,6 +46,16 @@ required: > additionalProperties: false > > examples: > + - | > + #include <dt-bindings/clock/qcom,lpasscc-sc8280xp.h> > + lpass_audiocc: clock-controller@3300000 { > + compatible = "qcom,sc8280xp-lpassaudiocc"; 4-space indentation. > + reg = <0x32a9000 0x1000>; Does not match node unit address either. > + #reset-cells = <1>; > + #clock-cells = <1>; > + qcom,adsp-pil-mode; Keep cells provider cells properties last? > + }; > + > - | > #include <dt-bindings/clock/qcom,lpasscc-sc8280xp.h> > lpasscc: clock-controller@3900000 { > diff --git a/include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h b/include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h > index df800ea2741c..d190d57fc81a 100644 > --- a/include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h > +++ b/include/dt-bindings/clock/qcom,lpasscc-sc8280xp.h > @@ -6,6 +6,11 @@ > #ifndef _DT_BINDINGS_CLK_QCOM_LPASSCC_SC8280XP_H > #define _DT_BINDINGS_CLK_QCOM_LPASSCC_SC8280XP_H > > +/* LPASS AUDIO CC CSR */ > +#define LPASS_AUDIO_SWR_RX_CGCR 0 > +#define LPASS_AUDIO_SWR_WSA_CGCR 1 > +#define LPASS_AUDIO_SWR_WSA2_CGCR 2 > + > /* LPASS TCSR */ > #define LPASS_AUDIO_SWR_TX_CGCR 0 Johan