Hi Linus, On Fri, Nov 28, 2014 at 9:05 AM, Vivek Gautam <gautamvivek1987@xxxxxxxxx> wrote: > Hi Alim, > > > On Wed, Nov 26, 2014 at 7:03 PM, Alim Akhtar <alim.akhtar@xxxxxxxxx> wrote: >> Hi Vivek, >> >> On Mon, Nov 24, 2014 at 6:32 PM, Vivek Gautam <gautam.vivek@xxxxxxxxxxx> wrote: >>> USB and Power regulator on Exynos7 require gpios available >>> in BUS1 pin controller block. >>> So adding the BUS1 pinctrl support. >>> >>> Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx> >>> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> >>> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> If the change looks good, will it be possible to pick it fo 3.19-rc1 ? That will really help enabling USB IP on exynos7. >>> --- >> Looks good to me. >> Thanks! >> >> Reviewed-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx> > > Thanks for the review. > >> >>> >>> This patch was part of series: >>> "[PATCH 00/11] Exynos7: Adding USB 3.0 support" >>> https://lkml.org/lkml/2014/11/21/247 >>> >>> Changes since V1: >>> - Added support for all pin banks which are part of BUS1 pin controller. >>> >>> drivers/pinctrl/samsung/pinctrl-exynos.c | 19 +++++++++++++++++++ >>> 1 file changed, 19 insertions(+) >>> >>> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c >>> index d5d4cfc..44e60dc 100644 >>> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c >>> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c >>> @@ -1300,6 +1300,20 @@ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = { >>> EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr3", 0x0c), >>> }; >>> >>> +/* pin banks of exynos7 pin-controller - BUS1 */ >>> +static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = { >>> + EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00), >>> + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpf1", 0x04), >>> + EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf2", 0x08), >>> + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpf3", 0x0c), >>> + EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpf4", 0x10), >>> + EXYNOS_PIN_BANK_EINTG(8, 0x0c0, "gpf5", 0x14), >>> + EXYNOS_PIN_BANK_EINTG(5, 0x0e0, "gpg1", 0x18), >>> + EXYNOS_PIN_BANK_EINTG(5, 0x100, "gpg2", 0x1c), >>> + EXYNOS_PIN_BANK_EINTG(6, 0x120, "gph1", 0x20), >>> + EXYNOS_PIN_BANK_EINTG(3, 0x140, "gpv6", 0x24), >>> +}; >>> + >>> const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { >>> { >>> /* pin-controller instance 0 Alive data */ >>> @@ -1342,5 +1356,10 @@ const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { >>> .pin_banks = exynos7_pin_banks7, >>> .nr_banks = ARRAY_SIZE(exynos7_pin_banks7), >>> .eint_gpio_init = exynos_eint_gpio_init, >>> + }, { >>> + /* pin-controller instance 8 BUS1 data */ >>> + .pin_banks = exynos7_pin_banks8, >>> + .nr_banks = ARRAY_SIZE(exynos7_pin_banks8), >>> + .eint_gpio_init = exynos_eint_gpio_init, >>> }, >>> }; >>> -- >>> 1.7.10.4 >>> >>> -- >>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >>> the body of a message to majordomo@xxxxxxxxxxxxxxx >>> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> >> >> -- >> Regards, >> Alim >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > -- > Best Regards > Vivek Gautam > Samsung R&D Institute, Bangalore > India -- Best Regards Vivek Gautam Samsung R&D Institute, Bangalore India -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html