Hi Vivek, On Mon, Nov 24, 2014 at 6:32 PM, Vivek Gautam <gautam.vivek@xxxxxxxxxxx> wrote: > USB and Power regulator on Exynos7 require gpios available > in BUS1 pin controller block. > So adding the BUS1 pinctrl support. > > Signed-off-by: Naveen Krishna Ch <naveenkrishna.ch@xxxxxxxxx> > Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> > --- Looks good to me. Thanks! Reviewed-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx> > > This patch was part of series: > "[PATCH 00/11] Exynos7: Adding USB 3.0 support" > https://lkml.org/lkml/2014/11/21/247 > > Changes since V1: > - Added support for all pin banks which are part of BUS1 pin controller. > > drivers/pinctrl/samsung/pinctrl-exynos.c | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c > index d5d4cfc..44e60dc 100644 > --- a/drivers/pinctrl/samsung/pinctrl-exynos.c > +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c > @@ -1300,6 +1300,20 @@ static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = { > EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr3", 0x0c), > }; > > +/* pin banks of exynos7 pin-controller - BUS1 */ > +static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = { > + EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00), > + EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpf1", 0x04), > + EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf2", 0x08), > + EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpf3", 0x0c), > + EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpf4", 0x10), > + EXYNOS_PIN_BANK_EINTG(8, 0x0c0, "gpf5", 0x14), > + EXYNOS_PIN_BANK_EINTG(5, 0x0e0, "gpg1", 0x18), > + EXYNOS_PIN_BANK_EINTG(5, 0x100, "gpg2", 0x1c), > + EXYNOS_PIN_BANK_EINTG(6, 0x120, "gph1", 0x20), > + EXYNOS_PIN_BANK_EINTG(3, 0x140, "gpv6", 0x24), > +}; > + > const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { > { > /* pin-controller instance 0 Alive data */ > @@ -1342,5 +1356,10 @@ const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = { > .pin_banks = exynos7_pin_banks7, > .nr_banks = ARRAY_SIZE(exynos7_pin_banks7), > .eint_gpio_init = exynos_eint_gpio_init, > + }, { > + /* pin-controller instance 8 BUS1 data */ > + .pin_banks = exynos7_pin_banks8, > + .nr_banks = ARRAY_SIZE(exynos7_pin_banks8), > + .eint_gpio_init = exynos_eint_gpio_init, > }, > }; > -- > 1.7.10.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Regards, Alim -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
