Re: [PATCH] arm64: dts: qcom: sm8550-qrd: add display and panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16/05/2023 17:20, Konrad Dybcio wrote:
> 
> 
> On 16.05.2023 17:17, Krzysztof Kozlowski wrote:
>> Enable Display Subsystem with Visionox VTDR6130 Panel (same as on
>> MTP8550).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>>
>> ---
>>
>> Context in the patch depends on:
>> 1. https://lore.kernel.org/linux-arm-msm/20230516133011.108093-1-krzysztof.kozlowski@xxxxxxxxxx/T/#t
>> 2. https://lore.kernel.org/linux-arm-msm/20230512160452.206585-1-krzysztof.kozlowski@xxxxxxxxxx/
>> ---
>>  arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 76 +++++++++++++++++++++++++
>>  1 file changed, 76 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
>> index 30b36a149125..03bf6bc2db4d 100644
>> --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
>> +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
>> @@ -420,6 +420,10 @@ vreg_l3g_1p2: ldo3 {
>>  	};
>>  };
>>  
>> +&dispcc {
>> +	status = "okay";
>> +};
> Missed this in the bigpatchdrop review.. It makes no sense to keep
> dispcc disabled by default (other than for lazily "solving" UEFI
> framebuffer being shut down)

Sure.

> 
>> +
>>  &gcc {
>>  	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
>>  		 <&pcie0_phy>,
>> @@ -431,6 +435,50 @@ &gcc {
>>  		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
>>  };
>>  
>> +&mdss {
>> +	status = "okay";
>> +};
>> +
>> +&mdss_dsi0 {
>> +	vdda-supply = <&vreg_l3e_1p2>;
>> +	status = "okay";
>> +
>> +	panel@0 {
>> +		compatible = "visionox,vtdr6130";
>> +		reg = <0>;
>> +
>> +		pinctrl-names = "default", "sleep";
>> +		pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
>> +		pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
> property-n
> property-names

Sure, copy-pasta from MTP8550.

>> +
>> +&mdss_mdp {
>> +	status = "okay";
>> +};
> This should also be enabled by default, MDSS is useless when MDP is
> disabled.

But don't we want to disable both when display is not used (not connected)?

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux