Re: [PATCH 10/23] arm64: zynqmp: Add linux,code for gpio button

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/2/23 15:35, Michal Simek wrote:
From: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>

BTN_MISC looks like the most reasonable option for this button.
Button is used by firmware to indicate (after reset, power up) that user
wants to do firmware upgrade via firmware update utility.
For bootloader or OS is this just user button which is worth to have it
mapped.
Also button can be used as a wakeup source and pressing it for more time
can generate more chars that's why also adding wakeup-source and autorepeat
properties.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
---

  arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 3 +++
  1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index 3862168fa026..340a5c43a8b6 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -55,6 +55,9 @@ gpio-keys {
  		key-fwuen {
  			label = "fwuen";
  			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+			autorepeat;
  		};
  	};

Applied.
M


--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP/Versal ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal/Versal NET SoCs
TF-A maintainer - Xilinx ZynqMP/Versal/Versal NET SoCs



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux