On 5/2/23 15:35, Michal Simek wrote:
With limited low level configuration done via psu-init only IPs connected
on SOM are initialized and configured. All IPs connected to carrier card
are not initialized. There is a need to do proper reset, pin configuration
and also clock setting.
The patch targets the last part which is setting up proper clock for EMMC
on production SOMs and SD on kv260-revB.
Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
---
arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 5 ++++-
arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 1 +
arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 1 +
arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 1 +
4 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
index 5e7e1bf5b811..681885c9bcbb 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -2,7 +2,8 @@
/*
* Clock specification for Xilinx ZynqMP
*
- * (C) Copyright 2017 - 2021, Xilinx, Inc.
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@xxxxxxxxxx>
*/
@@ -185,10 +186,12 @@ &sata {
&sdhci0 {
clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
+ assigned-clocks = <&zynqmp_clk SDIO0_REF>;
};
&sdhci1 {
clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
+ assigned-clocks = <&zynqmp_clk SDIO1_REF>;
};
&spi0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index 2f7a17ec58b4..cb4a5126c4ec 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -133,6 +133,7 @@ &sdhci1 { /* on CC with tuned parameters */
no-1-8-v;
disable-wp;
xlnx,mio-bank = <1>;
+ assigned-clock-rates = <187498123>;
};
&gem3 { /* required by spec */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index 4695e0e3714f..31bc120dee49 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -116,6 +116,7 @@ &sdhci1 { /* on CC with tuned parameters */
clk-phase-sd-hs = <126>, <60>;
clk-phase-uhs-sdr25 = <120>, <60>;
clk-phase-uhs-ddr50 = <126>, <48>;
+ assigned-clock-rates = <187498123>;
};
&gem3 { /* required by spec */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index 340a5c43a8b6..d3c6a9feb114 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -178,6 +178,7 @@ &sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
disable-wp;
bus-width = <8>;
xlnx,mio-bank = <0>;
+ assigned-clock-rates = <187498123>;
};
&spi1 { /* MIO6, 9-11 */
Applied.
M
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP/Versal ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal/Versal NET SoCs
TF-A maintainer - Xilinx ZynqMP/Versal/Versal NET SoCs
