On 5/15/23 6:34 PM, Konrad Dybcio wrote:
This short series brings a couple of fixes and features
(such as display out) for the QTI RB2 board. Similar patches
for the RB1 should be expected soon.
Depends on and based atop (in order):
20230505075354.1634547-1-bhupesh.sharma@xxxxxxxxxx
20230502053534.1240553-1-bhupesh.sharma@xxxxxxxxxx
20230505064039.1630025-1-bhupesh.sharma@xxxxxxxxxx
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
Konrad Dybcio (5):
arm64: dts: qcom: qrb4210-rb2: Describe fixed regulators
arm64: dts: qcom: qrb4210-rb2: Enable display out
arm64: dts: qcom: qrb4210-rb2: Add GPIO LEDs
arm64: dts: qcom: qrb4210-rb2: Enable load setting on SDHCI VQMMC
arm64: dts: qcom: qrb4210-rb2: Enable CAN bus controller
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 223 ++++++++++++++++++++++++++++++-
1 file changed, 220 insertions(+), 3 deletions(-)
---
base-commit: c768c054f1a722d4b973ddab81ee580b7e24a891
change-id: 20230515-topic-rb2-bits-22e685b4f48d
Best regards,
For the series:
Reviewed-and-Tested-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
Thanks.
