[PATCH 0/5] QTI RB2 features

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This short series brings a couple of fixes and features
(such as display out) for the QTI RB2 board. Similar patches
for the RB1 should be expected soon.

Depends on and based atop (in order):

20230505075354.1634547-1-bhupesh.sharma@xxxxxxxxxx
20230502053534.1240553-1-bhupesh.sharma@xxxxxxxxxx
20230505064039.1630025-1-bhupesh.sharma@xxxxxxxxxx

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
Konrad Dybcio (5):
      arm64: dts: qcom: qrb4210-rb2: Describe fixed regulators
      arm64: dts: qcom: qrb4210-rb2: Enable display out
      arm64: dts: qcom: qrb4210-rb2: Add GPIO LEDs
      arm64: dts: qcom: qrb4210-rb2: Enable load setting on SDHCI VQMMC
      arm64: dts: qcom: qrb4210-rb2: Enable CAN bus controller

 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 223 ++++++++++++++++++++++++++++++-
 1 file changed, 220 insertions(+), 3 deletions(-)
---
base-commit: c768c054f1a722d4b973ddab81ee580b7e24a891
change-id: 20230515-topic-rb2-bits-22e685b4f48d

Best regards,
-- 
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux