Re: [PATCH 2/2] arm64: dts: qcom: sc8280xp: Add SDC2 and enable on CRD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 9.05.2023 05:01, Bjorn Andersson wrote:
> The CRD has Micro SD slot, introduce the necessary DeviceTree nodes for
> enabling this.
> 
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 80 +++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi    | 39 +++++++++++
>  2 files changed, 119 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index 5b25d54b9591..f83411e0e7f8 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -308,6 +308,13 @@ vreg_l1c: ldo1 {
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
> +		vreg_l6c: ldo6 {
> +			regulator-name = "vreg_l6c";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <2960000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
>  		vreg_l7c: ldo7 {
>  			regulator-name = "vreg_l7c";
>  			regulator-min-microvolt = <2504000>;
> @@ -318,6 +325,13 @@ vreg_l7c: ldo7 {
>  						   RPMH_REGULATOR_MODE_HPM>;
>  		};
>  
> +		vreg_l9c: ldo9 {
> +			regulator-name = "vreg_l9c";
> +			regulator-min-microvolt = <2960000>;
> +			regulator-max-microvolt = <2960000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
Generally I ask people to add the missing regulator-allow-set-load,
but in case of the RPMh driver, should we also consider allowing LPM?

> +		};
> +
>  		vreg_l13c: ldo13 {
>  			regulator-name = "vreg_l13c";
>  			regulator-min-microvolt = <3072000>;
> @@ -600,6 +614,18 @@ &remoteproc_nsp0 {
>  	status = "okay";
>  };
>  
> +&sdc2 {
> +	cd-gpios = <&tlmm 131 GPIO_ACTIVE_LOW>;
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&sdc2_default_state>;
> +	pinctrl-1 = <&sdc2_sleep_state>;
pinctrl-n
pinctrl-names

please
> +	vmmc-supply = <&vreg_l9c>;
> +	vqmmc-supply = <&vreg_l6c>;
> +	no-sdio;
> +	no-mmc;
> +	status = "okay";
> +};
> +
>  &uart17 {
>  	compatible = "qcom,geni-debug-uart";
>  
> @@ -842,6 +868,60 @@ wake-n-pins {
>  		};
>  	};
>  
> +	sdc2_default_state: sdc2-default-state {
> +		clk-pins {
> +			pins = "sdc2_clk";
> +			drive-strength = <16>;
> +			bias-disable;
> +		};
> +
> +		cmd-pins {
> +			pins = "sdc2_cmd";
> +			drive-strength = <16>;
> +			bias-pull-up;
> +		};
> +
> +		data-pins {
> +			pins = "sdc2_data";
> +			drive-strength = <16>;
> +			bias-pull-up;
> +		};
> +
> +		card-detect-pins {
> +			pins = "gpio131";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-disable;
> +		};
> +	};
> +
> +	sdc2_sleep_state: sdc2-sleep-state {
> +		clk-pins {
> +			pins = "sdc2_clk";
> +			drive-strength = <2>;
> +			bias-disable;
> +		};
> +
> +		cmd-pins {
> +			pins = "sdc2_cmd";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +
> +		data-pins {
> +			pins = "sdc2_data";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +
> +		card-detect-pins {
> +			pins = "gpio131";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-disable;
> +		};
> +	};
That's totally SoC-specific, modulo the CD pin which can have
its own separate node and label

> +
>  	tpad_default: tpad-default-state {
>  		int-n-pins {
>  			pins = "gpio182";
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 8fa9fbfe5d00..21dfb48d923c 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -2815,6 +2815,45 @@ data-pins {
>  			};
>  		};
>  
> +		sdc2: mmc@8804000 {
> +			compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0 0x08804000 0 0x1000>;
> +
> +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> +				 <&gcc GCC_SDCC2_APPS_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>;
> +			clock-names = "iface", "core", "xo";
> +			resets = <&gcc GCC_SDCC4_BCR>;
4?

> +			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
> +			interconnect-names = "sdhc-ddr","cpu-sdhc";
> +			iommus = <&apps_smmu 0x4e0 0x0>;
> +			power-domains = <&rpmhpd SC8280XP_CX>;
> +			operating-points-v2 = <&sdc2_opp_table>;
> +			bus-width = <4>;
> +			dma-coherent;
> +
> +			status = "disabled";
> +
> +			sdc2_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-100000000 {
> +					opp-hz = /bits/ 64 <100000000>;
> +					required-opps = <&rpmhpd_opp_low_svs>;
You specified interconnects, but no bw values.. was that on purpose?

Other than these nits, lgtm
(generally, my dt sources don't even have sdhci to compare)

Konrad
> +				};
> +
> +				opp-202000000 {
> +					opp-hz = /bits/ 64 <202000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>;
> +				};
> +			};
> +		};
> +
>  		usb_0_qmpphy: phy@88eb000 {
>  			compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
>  			reg = <0 0x088eb000 0 0x4000>;



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux