Re: [PATCH v3 2/3] mfd: axp20x: Add support for AXP15060 PMIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lee,

Why there's no news about patch 3 for my series and axp313a series?

It can't work without patch 3. And could we see the fix for patch1/2 in

next RC?

Best regards,

Shengyu

On Thu, 04 May 2023, Krzysztof Kozlowski wrote:

On 03/05/2023 13:07, Andre Przywara wrote:
On Wed, 26 Apr 2023 15:27:40 +0100
Lee Jones <lee@xxxxxxxxxx> wrote:

Hi Lee,

I see this patch in Linus' tree, but something must have gone wrong here,
can you please check? See below ...

On Fri, 21 Apr 2023, Shengyu Qu wrote:

The AXP15060 is a PMIC chip produced by X-Powers, and could be connected
via an I2C bus.

Describe the regmap and the MFD bits, along with the registers exposed
via I2C. Eventually advertise the device using a new compatible string
and add support for power off the system.

The driver would disable PEK function if IRQ is not configured in device
tree, since some boards (For example, Starfive Visionfive 2) didn't
connect IRQ line of PMIC to SOC.

GPIO function isn't enabled in this commit, since its configuration
operation is different from any existing AXP PMICs and needs
logic modification on existing driver. GPIO support might come in later
patches.

---
You must not use these above the tags or Git will drop them.

Changes since v2:
  - Rebase to AXP313a series v10 [1] + newest (20230420) -next branch
So this patch was based on the AXP313a series, but I don't see that in
Linus' tree (or in any of your trees, if I have checked correctly).
There must have been a conflict, as this [PATCH v3 2/3] diff actually lists
the axp313a entry in the context lines.

  - Add axp_regulator_only_cells rather than directly using axp806_cells
    for cases that IRQ line isn't connected.

Changes since v1:
  - Nothing

[1] https://lore.kernel.org/linux-sunxi/20230401001850.4988-1-andre.przywara@xxxxxxx/

Signed-off-by: Shengyu Qu <wiagn233@xxxxxxxxxxx>
---
Put change-logs here instead.

  drivers/mfd/axp20x-i2c.c   |   2 +
  drivers/mfd/axp20x.c       | 107 +++++++++++++++++++++++++++++++++++++
  include/linux/mfd/axp20x.h |  85 +++++++++++++++++++++++++++++
  3 files changed, 194 insertions(+)
I manually added the missing tags for this and the DT patch and applied.
So this patch doesn't list any tags aside from Shengyu's
Signed-off-by. The patch in Linus' tree list a Reviewed-by: from
Krzysztof, which I don't see anywhere in the thread, he just reviewed the
binding patch, AFAICT.
Yep, I never reviewed this.

I see your tentative R-b: on v2, but with the
request to rebase and resend, which he did with v3. The applied patch
looks like v3, but not on the base commit this was send against.

So I am slightly confused, and am also wondering what happened to the
AXP313a patches? I see the binding patch merged, but not the MFD part,
even though you replied saying so.
Because the patch #1 was broken, see:
https://lore.kernel.org/all/TY3P286MB261177CF7AA2959BD9517DA998609@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/

The SoB and Reviewed-by were after --- and apparently b4 understood it
as cover letter and applied everywhere.

Lee,
Do you have the latest b4? If yes, this should be reported as b4 bug,
assuming you used it.
I am using b4, although the version I'm using is quite old (0.9.0).

Also, this was quite some time ago - I have slept since applying this
and do not distinctly remember doing so.  Thus, the application of your
R-b may well have been a mistake on my part.  I'll keep an eye for such
things in the future and if I see (and remember) an issue, I'll report
it.

Attachment: OpenPGP_0xE3520CC91929C8E7.asc
Description: OpenPGP public key

Attachment: OpenPGP_signature
Description: OpenPGP digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux