On MSM8996 two CPU clusters are interconnected using the Core Bus Fabric (CBF). In order for the CPU clusters to function properly, it should be clocked following the core's frequencies to provide adequate bandwidth. Register CBF as a clock (required for CPU to boot) and add a tiny interconnect layer on top of it to let cpufreq/opp scale the CBF clock. Changes since v5: - Fixed !INTERCONNECT warning (Konrad) - Fixed the sync_state wrapper for !INTERCONNECT case Changes since v4: - Fixed typos in commit messages Changes since v3: - Dropped merged patches - Moved interconnect shim to drivers/interconnect/icc-clk.c Changes since v2: - Added interconnect-related bindings - Switched CPU and CBF clocks to RPM_SMD_XO_A_CLK_SRC Changes since v1: - Relicensed schema to GPL-2.0 + BSD-2-Clause (Krzysztof) - Changed clock driver to use parent_hws (Konrad) - Fixed indentation in CBF clock driver (Konrad) - Changed MODULE_LICENSE of CBF clock driver to GPL from GPL-v2 - Switched CBF to use RPM_SMD_XO_CLK_SRC as one of the parents - Enabled RPM_SMD_XO_CLK_SRC on msm8996 platform and switch to it from RPM_SMD_BB_CLK1 clock Dmitry Baryshkov (4): dt-bindings: interconnect/msm8996-cbf: add defines to be used by CBF interconnect: add clk-based icc provider support clk: qcom: cbf-msm8996: scale CBF clock according to the CPUfreq arm64: dts: qcom: msm8996: scale CBF clock according to the CPUfreq arch/arm64/boot/dts/qcom/msm8996.dtsi | 51 ++++++ drivers/clk/qcom/Kconfig | 1 + drivers/clk/qcom/clk-cbf-8996.c | 60 ++++++- drivers/interconnect/Kconfig | 6 + drivers/interconnect/Makefile | 2 + drivers/interconnect/icc-clk.c | 168 ++++++++++++++++++ .../interconnect/qcom,msm8996-cbf.h | 12 ++ include/linux/interconnect-clk.h | 22 +++ 8 files changed, 321 insertions(+), 1 deletion(-) create mode 100644 drivers/interconnect/icc-clk.c create mode 100644 include/dt-bindings/interconnect/qcom,msm8996-cbf.h create mode 100644 include/linux/interconnect-clk.h -- 2.39.2
