[PATCH] arm64: dts: ti: Clean up pin node names to avoid warnings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We should have nodes named pin or pins, and the node names should not
have a 0x prefix for the hex address. Otherwise we will see warnings
when the pinctrl-single yaml binding gets merged.

Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts           | 2 +-
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts           | 2 +-
 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts | 4 ++--
 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi          | 6 +++---
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -432,7 +432,7 @@ AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
 		>;
 	};
 
-	gbe_pmx_obsclk: gbe-pmx-clk-default {
+	gbe_pmx_obsclk: gbe-clk-pins-default {
 		pinctrl-single,pins = <
 			AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
 		>;
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -150,7 +150,7 @@ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
 		>;
 	};
 
-	wkup_pca554_default: wkup-pca554-default {
+	wkup_pca554_default: wkup-pca554-pins-default {
 		pinctrl-single,pins = <
 			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
 		>;
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -33,7 +33,7 @@ AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
 		>;
 	};
 
-	main_bkey_pcie_reset: main-bkey-pcie-reset {
+	main_bkey_pcie_reset: main-bkey-pcie-reset-pins-default {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7)  /* (AG13) GPIO1_15 */
 		>;
@@ -46,7 +46,7 @@ AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7)  /* (AD13) GPIO1_19 */
 		>;
 	};
 
-	main_m2_pcie_mux_control: main-m2-pcie-mux-control {
+	main_m2_pcie_mux_control: main-m2-pcie-mux-control-pins-default {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7)  /* (AG22) GPIO0_82 */
 			AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7)  /* (AE20) GPIO0_88 */
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -62,7 +62,7 @@ wkup_pmx0: pinctrl@4301c000 {
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	wkup_pmx1: pinctrl@0x4301c038 {
+	wkup_pmx1: pinctrl@4301c038 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c038 0x00 0x8>;
@@ -71,7 +71,7 @@ wkup_pmx1: pinctrl@0x4301c038 {
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	wkup_pmx2: pinctrl@0x4301c068 {
+	wkup_pmx2: pinctrl@4301c068 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c068 0x00 0xec>;
@@ -80,7 +80,7 @@ wkup_pmx2: pinctrl@0x4301c068 {
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
-	wkup_pmx3: pinctrl@0x4301c174 {
+	wkup_pmx3: pinctrl@4301c174 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
 		reg = <0x00 0x4301c174 0x00 0x20>;
-- 
2.40.1



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux