According to the msm-3.18 vendor kernel from Qualcomm [1], mdm9607 uses a non-standard slope value of 3000 (instead of 3200) for all sensors. Fill it properly similar to the 8939 code added recently. [1]: https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/blob/LE.UM.4.3.2.r1-04200-9x07/arch/arm/boot/dts/qcom/mdm9607.dtsi#L875 Fixes: a2149ab815fc ("thermal/drivers/qcom/tsens-v0_1: Add support for MDM9607") Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxxxxxxx> --- drivers/thermal/qcom/tsens-v0_1.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c index 106d26076e3f..1b454de3928d 100644 --- a/drivers/thermal/qcom/tsens-v0_1.c +++ b/drivers/thermal/qcom/tsens-v0_1.c @@ -222,6 +222,16 @@ static int __init init_8939(struct tsens_priv *priv) { return init_common(priv); } +static int __init init_9607(struct tsens_priv *priv) +{ + int i; + + for (i = 0; i < priv->num_sensors; ++i) + priv->sensor[i].slope = 3000; + + return init_common(priv); +} + /* v0.1: 8916, 8939, 8974, 9607 */ static struct tsens_features tsens_v0_1_feat = { @@ -271,12 +281,6 @@ static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = { [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), }; -static const struct tsens_ops ops_v0_1 = { - .init = init_common, - .calibrate = tsens_calibrate_common, - .get_temp = get_temp_common, -}; - static const struct tsens_ops ops_8916 = { .init = init_common, .calibrate = calibrate_8916, @@ -320,9 +324,15 @@ struct tsens_plat_data data_8974 = { .fields = tsens_v0_1_regfields, }; +static const struct tsens_ops ops_9607 = { + .init = init_9607, + .calibrate = tsens_calibrate_common, + .get_temp = get_temp_common, +}; + struct tsens_plat_data data_9607 = { .num_sensors = 5, - .ops = &ops_v0_1, + .ops = &ops_9607, .feat = &tsens_v0_1_feat, .fields = tsens_v0_1_regfields, }; -- 2.30.2
