This rewrites the STMPE GPIO bindings to a YAML schema.
We add the properties that are used in the widely used
STMPE GPIO device nodes found in the wild, most notably
interrupt support, so interrupt-cells and
interrupt-controller is now part of the bindings.
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v3->v4:
- Realize that there were actually some old bindings so we
need to get rid of them as part of this patch.
- Fix blank lines after description: keyword.
ChangeLog v2->v3:
- Use a compact hog node schema backed by the standard hog
schema.
ChangeLog v1->v2:
- New patch split off from the MFD patch.
---
.../devicetree/bindings/gpio/gpio-stmpe.txt | 17 -------
.../devicetree/bindings/gpio/st,stmpe-gpio.yaml | 53 ++++++++++++++++++++++
2 files changed, 53 insertions(+), 17 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
deleted file mode 100644
index b33f8f02c0d7..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-STMPE gpio
-----------
-
-Required properties:
- - compatible: "st,stmpe-gpio"
-
-Optional properties:
- - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
- due to different usage (e.g. touch, keypad)
-
-Node should be child node of stmpe node to which it belongs.
-
-Example:
- stmpe_gpio {
- compatible = "st,stmpe-gpio";
- st,norequest-mask = <0x20>; //gpio 5 can't be used
- };
diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
new file mode 100644
index 000000000000..22c0cae73425
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Port Expander (STMPE) GPIO Block
+
+description:
+ STMicroelectronics Port Expander (STMPE) is a series of slow
+ bus controllers for various expanded peripherals such as GPIO, keypad,
+ touchscreen, ADC, PWM or rotator. It can contain one or several different
+ peripherals connected to SPI or I2C. These bindings pertain to the
+ GPIO portions of these expanders.
+
+maintainers:
+ - Linus Walleij <linus.walleij@xxxxxxxxxx>
+
+properties:
+ compatible:
+ const: st,stmpe-gpio
+
+ "#gpio-cells":
+ const: 2
+
+ "#interrupt-cells":
+ const: 2
+
+ gpio-controller: true
+
+ interrupt-controller: true
+
+ st,norequest-mask:
+ description:
+ A bitmask of GPIO lines that cannot be requested because for
+ for example not being connected to anything on the system
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+ "^.+-hog(-[0-9]+)?$":
+ type: object
+
+ required:
+ - gpio-hog
+
+additionalProperties: false
+
+required:
+ - compatible
+ - "#gpio-cells"
+ - "#interrupt-cells"
+ - gpio-controller
+ - interrupt-controller
--
2.34.1
