On 08/05/2023 11:30, Konrad Dybcio wrote:
On 7.05.2023 21:07, Dmitry Baryshkov wrote:
To get GPU working with the OCMEM, the oxili_ocmemgx_clk clock should be
enabled. Pass it to the GPU to get it to work on apq8074/msm8974 boards.
Fixes: fe079442db63 ("ARM: dts: qcom: msm8974: add gpu support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
Uhh.. this clock should be managed by RPM with:
type = MEM
id = 2
just like it's defined for 8994 today.
Could you try adding it in rpmcc and confirming?
There is an RPM_SMD_OCMEMGX_CLK clk already, it is a bus clock for the
ocmemnoc.
Konrad
arch/arm/boot/dts/qcom-msm8974.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 834ad95515b1..fb661c1bd3d5 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -2104,8 +2104,9 @@ gpu: adreno@fdb00000 {
clocks = <&mmcc OXILI_GFX3D_CLK>,
<&mmcc OXILICX_AHB_CLK>,
+ <&mmcc OXILI_OCMEMGX_CLK>,
<&mmcc OXILICX_AXI_CLK>;
- clock-names = "core", "iface", "mem_iface";
+ clock-names = "core", "iface", "mem", "mem_iface";
sram = <&gmu_sram>;
power-domains = <&mmcc OXILICX_GDSC>;
--
With best wishes
Dmitry
