Re: [PATCH v3 1/5] phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26-04-23, 13:29, Dmitry Rokosov wrote:
> Previously, all Amlogic boards used the XTAL clock as the default board
> clock for the USB PHY input, so there was no need to enable it.
> However, with the introduction of new Amlogic SoCs like the A1 family,
> the USB PHY now uses a gated clock. Hence, it is necessary to enable
> this gated clock during the PHY initialization sequence, or disable it
> during the PHY exit, as appropriate.

Applied to phy/next, thanks

-- 
~Vinod



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux