Re: [PATCH v6 06/15] drm/msm/a6xx: Introduce GMU wrapper support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 6.05.2023 16:46, Akhil P Oommen wrote:
> On Fri, May 05, 2023 at 12:35:18PM +0200, Konrad Dybcio wrote:
>>
>>
>> On 5.05.2023 10:46, Akhil P Oommen wrote:
>>> On Thu, May 04, 2023 at 08:34:07AM +0200, Konrad Dybcio wrote:
>>>>
>>>>
>>>> On 3.05.2023 22:32, Akhil P Oommen wrote:
>>>>> On Tue, May 02, 2023 at 11:40:26AM +0200, Konrad Dybcio wrote:
>>>>>>
>>>>>>
>>>>>> On 2.05.2023 09:49, Akhil P Oommen wrote:
>>>>>>> On Sat, Apr 01, 2023 at 01:54:43PM +0200, Konrad Dybcio wrote:
>>>>>>>> Some (particularly SMD_RPM, a.k.a non-RPMh) SoCs implement A6XX GPUs
>>>>>>>> but don't implement the associated GMUs. This is due to the fact that
>>>>>>>> the GMU directly pokes at RPMh. Sadly, this means we have to take care
>>>>>>>> of enabling & scaling power rails, clocks and bandwidth ourselves.
>>>>>>>>
>>>>>>>> Reuse existing Adreno-common code and modify the deeply-GMU-infused
>>>>>>>> A6XX code to facilitate these GPUs. This involves if-ing out lots
>>>>>>>> of GMU callbacks and introducing a new type of GMU - GMU wrapper (it's
>>>>>>>> the actual name that Qualcomm uses in their downstream kernels).
>>>>>>>>
>>>>>>>> This is essentially a register region which is convenient to model
>>>>>>>> as a device. We'll use it for managing the GDSCs. The register
>>>>>>>> layout matches the actual GMU_CX/GX regions on the "real GMU" devices
>>>>>>>> and lets us reuse quite a bit of gmu_read/write/rmw calls.
>>>>>>> << I sent a reply to this patch earlier, but not sure where it went.
>>>>>>> Still figuring out Mutt... >>
>>>>>> Answered it here:
>>>>>>
>>>>>> https://lore.kernel.org/linux-arm-msm/4d3000c1-c3f9-0bfd-3eb3-23393f9a8f77@xxxxxxxxxx/
>>>>>
>>>>> Thanks. Will check and respond there if needed.
>>>>>
>>>>>>
>>>>>> I don't think I see any new comments in this "reply revision" (heh), so please
>>>>>> check that one out.
>>>>>>
>>>>>>>
>>>>>>> Only convenience I found is that we can reuse gmu register ops in a few
>>>>>>> places (< 10 I think). If we just model this as another gpu memory
>>>>>>> region, I think it will help to keep gmu vs gmu-wrapper/no-gmu
>>>>>>> architecture code with clean separation. Also, it looks like we need to
>>>>>>> keep a dummy gmu platform device in the devicetree with the current
>>>>>>> approach. That doesn't sound right.
>>>>>> That's correct, but.. if we switch away from that, VDD_GX/VDD_CX will
>>>>>> need additional, gmuwrapper-configuration specific code anyway, as
>>>>>> OPP & genpd will no longer make use of the default behavior which
>>>>>> only gets triggered if there's a single power-domains=<> entry, afaicu.
>>>>> Can you please tell me which specific *default behviour* do you mean here?
>>>>> I am curious to know what I am overlooking here. We can always get a cxpd/gxpd device
>>>>> and vote for the gdscs directly from the driver. Anything related to
>>>>> OPP?
>>>> I *believe* this is true:
>>>>
>>>> if (ARRAY_SIZE(power-domains) == 1) {
>>>> 	of generic code will enable the power domain at .probe time
>>> we need to handle the voting directly. I recently shared a patch to
>>> vote cx gdsc from gpu driver. Maybe we can ignore this when gpu has
>>> only cx rail due to this logic you quoted here.
>>>
>>> I see that you have handled it mostly correctly from the gpu driver in the updated
>>> a6xx_pm_suspend() callback. Just the power domain device ptrs should be moved to
>>> gpu from gmu.
>>>
>>>>
>>>> 	opp APIs will default to scaling that domain with required-opps
>>>
>>>> }
>>>>
>>>> and we do need to put GX/CX (with an MX parent to match) there, as the
>>>> AP is responsible for voting in this configuration
>>>
>>> We should vote to turn ON gx/cx headswitches through genpd from gpu driver. When you vote for
>>> core clk frequency, *clock driver is supposed to scale* all the necessary
>>> regulators. At least that is how downstream works. You can refer the downstream
>>> gpucc clk driver of these SoCs. I am not sure how much of that can be easily converted to
>>> upstream.
>>>
>>> Also, how does having a gmu dt node help in this regard? Feel free to
>>> elaborate, I am not very familiar with clk/regulator implementations.
>> Okay so I think we have a bit of a confusion here.
>>
>> Currently, with this patchset we manage things like this:
>>
>> 1. GPU has a VDD_GX (or equivalent[1]) line passed in power-domains=<>, which
>>    is then used with OPP APIs to ensure it's being scaled on freq change [2].
>>    The VDD_lines coming from RPM(h) are described as power domains upstream
>>    *unlike downstream*, which represents them as regulators with preset voltage
>>    steps (and perhaps that's what had you confused). What's more is that GDSCs
>>    are also modeled as genpds instead of regulators, hence they sort of "fight"
>>    for the spot in power-domains=<> of a given node.
> 
> Thanks for clarifying. I didn't get this part "hence they sort of "fight" for the spot in power-domains".
> What spot exactly did you mean here? The spot for PD to be used during scaling?
> 
> It seems like you are hinting that there is some sort of limitation in keeping all the
> 3 power domains (cx gdsc, gx gdsc and cx rail) under the gpu node in dt. Please explain
> why we can't keep all the 3 power domains under gpu node and call an API
> (devm_pm_opp_attach_genpd() ??) to select the power domain which should be scaled?
Eh we could, but this adds a lot of boilerplate code:

- genpd handling with get/put (I'm no genpd master but devm_pm_opp_attach_genpd
  sounds rather hacky to me)
- new r/w/rmw functions would need to be introduced for accessing
  GMU_CX registers as the reg defines wouldn't match so we'd have
  to include a new magic offset
- all the reused gmu_ callbacks would need to be separated out
- A619_holi would be even more problematic to distinguish from A619,
  similar story goes for firmware loading requirements

> 
>>
>> 2. GMU wrapper gets CX_GDSC & GX_GDSC handles in power-domains=<> (just like
>>    the real GMU in the current state of upstream [3]), which are then governed
>>    through explicit genpd calls to turn them on/off when the GPU resume/suspend/
>>    crash recovery functions are called.
>>
>> 3. GPUs with GMU, like A630, don't get any power-domains=<> entries in DT,
>>    instead relying on the GMU firmware to communicate necessary requests
>>    to the VDD_xyz resources directly to RPMh, as part of the DVFS routines.
>>    If GMU wasn't so smart, we would have to do the exact same VDD_xyz+OPP dance
>>    there - that's precisely what's going on under the hood.
>>
>> 4. Adreno SMMU gets a handle to CX_GDSC so that when OF probe funcs are called,
>>    (and SMMUs probe way way before all things drm) the headswitch is de-asserted
>>    and its registers and related clocks are accessible.
>>
>>
>> All this makes me believe the way I generally architected things in
>> this series is correct.
>>
>>
>> [1] A610 (and I think A612) lack a VDD_GX line, so they power the GPU from
>>     VDD_CX, but that's just an implementation detail which is handled by
>>     simply passing the correct one in DTS, the code doesn't care.
>>
>> [2] Hence my recent changes to use dev_pm_opp_set_rate() wherever possible,
>>     this func reads requires-opps in OPP table entries and ensures to elevate
>>     the GENPD's performance state before switching frequencies
>>
>> [3] Please take a look at the "end product" here:
>>     https://github.com/SoMainline/linux/commit/fb16757c3bf4c087ac597d70c7a98755d46bb323
>>     you can open e.g. sdm845.dtsi for comparison with real GMU
> 
> This dt definition for a610 gpu clearly shows the issue I have here. Someone
> looking at this gets a very wrong picture about the platform like there is actually nothing
> resembling a gmu IP in a610. Is gmu or gmu-cx register region really present in this hw?
Yes it is! Take a look at this hunk for example

if (adreno_has_gmu_wrapper(adreno_gpu)) {
	/* Do it here, as GMU wrapper only inits the GMU for memory reservation etc. */

	/* Set up the CX GMU counter 0 to count busy ticks */
	gmu_write(gmu, REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_MASK, 0xff000000);

	/* Enable power counter 0 */
	gmu_rmw(gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_SELECT_0, 0xff, BIT(5));
	gmu_write(gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_ENABLE, 1);
}

they are present, functional and at a predictable offset, just like
the real thing! The "only" difference is that there's no GMU_GX, so
registers responsible for interfacing with the MCU that lives (well,
would live) on the GPU island. For all I know, it may actually even
be physically there, just disabled / fused off as there's no RPMh to
communicate with.. In fact, I'd suspect that's precisely the case
on A619_holi (vs normal A619 which uses a GMU on RPMh-enabled SM6350).

Perhaps I could rename the GMU wrapper's reg-names entry to "gmu_cx" to
make things more obvious?

Konrad

> 
> Just a side note about the dt file you shared:
> 	1. At line: 1243, It shouldn't have gx gdsc, right?
> 	2. At line: 1172, SM6115_VDDCX -> SM6115_VDDGX?
> 
> -Akhil
(ignoring as agreed in your replies)

> 
>>
>> I hope this answers your concerns. If not, I'll be happy to elaborate.
>>
>> Konrad
>>>
>>> -Akhil.
>>>>
>>>> Konrad
>>>>>
>>>>> -Akhil
>>>>>>
>>>>>> If nothing else, this is a very convenient way to model a part of the
>>>>>> GPU (as that's essentially what GMU_CX is, to my understanding) and
>>>>>> the bindings people didn't shoot me in the head for proposing this, so
>>>>>> I assume it'd be cool to pursue this..
>>>>>>
>>>>>> Konrad
>>>>>>>>
>>>>>>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>>>>>>>> ---
>>>>>>>>  drivers/gpu/drm/msm/adreno/a6xx_gmu.c       |  72 +++++++-
>>>>>>>>  drivers/gpu/drm/msm/adreno/a6xx_gpu.c       | 255 +++++++++++++++++++++++++---
>>>>>>>>  drivers/gpu/drm/msm/adreno/a6xx_gpu.h       |   1 +
>>>>>>>>  drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c |  14 +-
>>>>>>>>  drivers/gpu/drm/msm/adreno/adreno_gpu.c     |   8 +-
>>>>>>>>  drivers/gpu/drm/msm/adreno/adreno_gpu.h     |   6 +
>>>>>>>>  6 files changed, 318 insertions(+), 38 deletions(-)
>>>>>>>>
>>>>>>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
>>>>>>>> index 87babbb2a19f..b1acdb027205 100644
>>>>>>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
>>>>>>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
>>>>>>>> @@ -1469,6 +1469,7 @@ static int a6xx_gmu_get_irq(struct a6xx_gmu *gmu, struct platform_device *pdev,
>>>>>>>>  
>>>>>>>>  void a6xx_gmu_remove(struct a6xx_gpu *a6xx_gpu)
>>>>>>>>  {
>>>>>>>> +	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
>>>>>>>>  	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
>>>>>>>>  	struct platform_device *pdev = to_platform_device(gmu->dev);
>>>>>>>>  
>>>>>>>> @@ -1494,10 +1495,12 @@ void a6xx_gmu_remove(struct a6xx_gpu *a6xx_gpu)
>>>>>>>>  	gmu->mmio = NULL;
>>>>>>>>  	gmu->rscc = NULL;
>>>>>>>>  
>>>>>>>> -	a6xx_gmu_memory_free(gmu);
>>>>>>>> +	if (!adreno_has_gmu_wrapper(adreno_gpu)) {
>>>>>>>> +		a6xx_gmu_memory_free(gmu);
>>>>>>>>  
>>>>>>>> -	free_irq(gmu->gmu_irq, gmu);
>>>>>>>> -	free_irq(gmu->hfi_irq, gmu);
>>>>>>>> +		free_irq(gmu->gmu_irq, gmu);
>>>>>>>> +		free_irq(gmu->hfi_irq, gmu);
>>>>>>>> +	}
>>>>>>>>  
>>>>>>>>  	/* Drop reference taken in of_find_device_by_node */
>>>>>>>>  	put_device(gmu->dev);
>>>>>>>> @@ -1516,6 +1519,69 @@ static int cxpd_notifier_cb(struct notifier_block *nb,
>>>>>>>>  	return 0;
>>>>>>>>  }
>>>>>>>>  
>>>>>>>> +int a6xx_gmu_wrapper_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node)
>>>>>>>> +{
>>>>>>>> +	struct platform_device *pdev = of_find_device_by_node(node);
>>>>>>>> +	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
>>>>>>>> +	int ret;
>>>>>>>> +
>>>>>>>> +	if (!pdev)
>>>>>>>> +		return -ENODEV;
>>>>>>>> +
>>>>>>>> +	gmu->dev = &pdev->dev;
>>>>>>>> +
>>>>>>>> +	of_dma_configure(gmu->dev, node, true);
>>>>>>> why setup dma for a device that is not actually present?
>>>>>>>> +
>>>>>>>> +	pm_runtime_enable(gmu->dev);
>>>>>>>> +
>>>>>>>> +	/* Mark legacy for manual SPTPRAC control */
>>>>>>>> +	gmu->legacy = true;
>>>>>>>> +
>>>>>>>> +	/* Map the GMU registers */
>>>>>>>> +	gmu->mmio = a6xx_gmu_get_mmio(pdev, "gmu");
>>>>>>>> +	if (IS_ERR(gmu->mmio)) {
>>>>>>>> +		ret = PTR_ERR(gmu->mmio);
>>>>>>>> +		goto err_mmio;
>>>>>>>> +	}
>>>>>>>> +
>>>>>>>> +	gmu->cxpd = dev_pm_domain_attach_by_name(gmu->dev, "cx");
>>>>>>>> +	if (IS_ERR(gmu->cxpd)) {
>>>>>>>> +		ret = PTR_ERR(gmu->cxpd);
>>>>>>>> +		goto err_mmio;
>>>>>>>> +	}
>>>>>>>> +
>>>>>>>> +	if (!device_link_add(gmu->dev, gmu->cxpd, DL_FLAG_PM_RUNTIME)) {
>>>>>>>> +		ret = -ENODEV;
>>>>>>>> +		goto detach_cxpd;
>>>>>>>> +	}
>>>>>>>> +
>>>>>>>> +	init_completion(&gmu->pd_gate);
>>>>>>>> +	complete_all(&gmu->pd_gate);
>>>>>>>> +	gmu->pd_nb.notifier_call = cxpd_notifier_cb;
>>>>>>>> +
>>>>>>>> +	/* Get a link to the GX power domain to reset the GPU */
>>>>>>>> +	gmu->gxpd = dev_pm_domain_attach_by_name(gmu->dev, "gx");
>>>>>>>> +	if (IS_ERR(gmu->gxpd)) {
>>>>>>>> +		ret = PTR_ERR(gmu->gxpd);
>>>>>>>> +		goto err_mmio;
>>>>>>>> +	}
>>>>>>>> +
>>>>>>>> +	gmu->initialized = true;
>>>>>>>> +
>>>>>>>> +	return 0;
>>>>>>>> +
>>>>>>>> +detach_cxpd:
>>>>>>>> +	dev_pm_domain_detach(gmu->cxpd, false);
>>>>>>>> +
>>>>>>>> +err_mmio:
>>>>>>>> +	iounmap(gmu->mmio);
>>>>>>>> +
>>>>>>>> +	/* Drop reference taken in of_find_device_by_node */
>>>>>>>> +	put_device(gmu->dev);
>>>>>>>> +
>>>>>>>> +	return ret;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>>  int a6xx_gmu_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node)
>>>>>>>>  {
>>>>>>>>  	struct adreno_gpu *adreno_gpu = &a6xx_gpu->base;
>>>>>>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>>>>>>>> index 931f9f3b3a85..8e0345ffab81 100644
>>>>>>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>>>>>>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>>>>>>>> @@ -20,9 +20,11 @@ static inline bool _a6xx_check_idle(struct msm_gpu *gpu)
>>>>>>>>  	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
>>>>>>>>  	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
>>>>>>>>  
>>>>>>>> -	/* Check that the GMU is idle */
>>>>>>>> -	if (!a6xx_gmu_isidle(&a6xx_gpu->gmu))
>>>>>>>> -		return false;
>>>>>>>> +	if (!adreno_has_gmu_wrapper(adreno_gpu)) {
>>>>>>>> +		/* Check that the GMU is idle */
>>>>>>>> +		if (!a6xx_gmu_isidle(&a6xx_gpu->gmu))
>>>>>>>> +			return false;
>>>>>>>> +	}
>>>>>>>>  
>>>>>>>>  	/* Check tha the CX master is idle */
>>>>>>>>  	if (gpu_read(gpu, REG_A6XX_RBBM_STATUS) &
>>>>>>>> @@ -612,13 +614,15 @@ static void a6xx_set_hwcg(struct msm_gpu *gpu, bool state)
>>>>>>>>  		return;
>>>>>>>>  
>>>>>>>>  	/* Disable SP clock before programming HWCG registers */
>>>>>>>> -	gmu_rmw(gmu, REG_A6XX_GPU_GMU_GX_SPTPRAC_CLOCK_CONTROL, 1, 0);
>>>>>>>> +	if (!adreno_has_gmu_wrapper(adreno_gpu))
>>>>>>>> +		gmu_rmw(gmu, REG_A6XX_GPU_GMU_GX_SPTPRAC_CLOCK_CONTROL, 1, 0);
>>>>>>>>  
>>>>>>>>  	for (i = 0; (reg = &adreno_gpu->info->hwcg[i], reg->offset); i++)
>>>>>>>>  		gpu_write(gpu, reg->offset, state ? reg->value : 0);
>>>>>>>>  
>>>>>>>>  	/* Enable SP clock */
>>>>>>>> -	gmu_rmw(gmu, REG_A6XX_GPU_GMU_GX_SPTPRAC_CLOCK_CONTROL, 0, 1);
>>>>>>>> +	if (!adreno_has_gmu_wrapper(adreno_gpu))
>>>>>>>> +		gmu_rmw(gmu, REG_A6XX_GPU_GMU_GX_SPTPRAC_CLOCK_CONTROL, 0, 1);
>>>>>>>>  
>>>>>>>>  	gpu_write(gpu, REG_A6XX_RBBM_CLOCK_CNTL, state ? clock_cntl_on : 0);
>>>>>>>>  }
>>>>>>>> @@ -1018,10 +1022,13 @@ static int hw_init(struct msm_gpu *gpu)
>>>>>>>>  {
>>>>>>>>  	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
>>>>>>>>  	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
>>>>>>>> +	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
>>>>>>>>  	int ret;
>>>>>>>>  
>>>>>>>> -	/* Make sure the GMU keeps the GPU on while we set it up */
>>>>>>>> -	a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET);
>>>>>>>> +	if (!adreno_has_gmu_wrapper(adreno_gpu)) {
>>>>>>>> +		/* Make sure the GMU keeps the GPU on while we set it up */
>>>>>>>> +		a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET);
>>>>>>>> +	}
>>>>>>>>  
>>>>>>>>  	/* Clear GBIF halt in case GX domain was not collapsed */
>>>>>>>>  	if (a6xx_has_gbif(adreno_gpu))
>>>>>>>> @@ -1144,6 +1151,17 @@ static int hw_init(struct msm_gpu *gpu)
>>>>>>>>  			0x3f0243f0);
>>>>>>>>  	}
>>>>>>>>  
>>>>>>>> +	if (adreno_has_gmu_wrapper(adreno_gpu)) {
>>>>>>>> +		/* Do it here, as GMU wrapper only inits the GMU for memory reservation etc. */
>>>>>>>> +
>>>>>>>> +		/* Set up the CX GMU counter 0 to count busy ticks */
>>>>>>>> +		gmu_write(gmu, REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_MASK, 0xff000000);
>>>>>>>> +
>>>>>>>> +		/* Enable power counter 0 */
>>>>>>>> +		gmu_rmw(gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_SELECT_0, 0xff, BIT(5));
>>>>>>>> +		gmu_write(gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_ENABLE, 1);
>>>>>>>> +	}
>>>>>>>> +
>>>>>>>>  	/* Protect registers from the CP */
>>>>>>>>  	a6xx_set_cp_protect(gpu);
>>>>>>>>  
>>>>>>>> @@ -1233,6 +1251,8 @@ static int hw_init(struct msm_gpu *gpu)
>>>>>>>>  	}
>>>>>>>>  
>>>>>>>>  out:
>>>>>>>> +	if (adreno_has_gmu_wrapper(adreno_gpu))
>>>>>>>> +		return ret;
>>>>>>>>  	/*
>>>>>>>>  	 * Tell the GMU that we are done touching the GPU and it can start power
>>>>>>>>  	 * management
>>>>>>>> @@ -1267,6 +1287,9 @@ static void a6xx_dump(struct msm_gpu *gpu)
>>>>>>>>  	adreno_dump(gpu);
>>>>>>>>  }
>>>>>>>>  
>>>>>>>> +#define GBIF_GX_HALT_MASK	BIT(0)
>>>>>>>> +#define GBIF_CLIENT_HALT_MASK	BIT(0)
>>>>>>>> +#define GBIF_ARB_HALT_MASK	BIT(1)
>>>>>>>>  #define VBIF_RESET_ACK_TIMEOUT	100
>>>>>>>>  #define VBIF_RESET_ACK_MASK	0x00f0
>>>>>>>>  
>>>>>>>> @@ -1299,7 +1322,8 @@ static void a6xx_recover(struct msm_gpu *gpu)
>>>>>>>>  	 * Turn off keep alive that might have been enabled by the hang
>>>>>>>>  	 * interrupt
>>>>>>>>  	 */
>>>>>>>> -	gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_GMU_PWR_COL_KEEPALIVE, 0);
>>>>>>>> +	if (!adreno_has_gmu_wrapper(adreno_gpu))
>>>>>>>> +		gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_GMU_PWR_COL_KEEPALIVE, 0);
>>>>>>>
>>>>>>> Maybe it is better to move this to a6xx_gmu_force_power_off.
>>>>>>>
>>>>>>>>  
>>>>>>>>  	pm_runtime_dont_use_autosuspend(&gpu->pdev->dev);
>>>>>>>>  
>>>>>>>> @@ -1329,6 +1353,32 @@ static void a6xx_recover(struct msm_gpu *gpu)
>>>>>>>>  
>>>>>>>>  	dev_pm_genpd_remove_notifier(gmu->cxpd);
>>>>>>>>  
>>>>>>>> +	/* Software-reset the GPU */
>>>>>>>
>>>>>>> This is not soft reset sequence. We are trying to quiescent gpu - ddr
>>>>>>> traffic with this sequence.
>>>>>>>
>>>>>>>> +	if (adreno_has_gmu_wrapper(adreno_gpu)) {
>>>>>>>> +		/* Halt the GX side of GBIF */
>>>>>>>> +		gpu_write(gpu, REG_A6XX_RBBM_GBIF_HALT, GBIF_GX_HALT_MASK);
>>>>>>>> +		spin_until(gpu_read(gpu, REG_A6XX_RBBM_GBIF_HALT_ACK) &
>>>>>>>> +			   GBIF_GX_HALT_MASK);
>>>>>>>> +
>>>>>>>> +		/* Halt new client requests on GBIF */
>>>>>>>> +		gpu_write(gpu, REG_A6XX_GBIF_HALT, GBIF_CLIENT_HALT_MASK);
>>>>>>>> +		spin_until((gpu_read(gpu, REG_A6XX_GBIF_HALT_ACK) &
>>>>>>>> +			   (GBIF_CLIENT_HALT_MASK)) == GBIF_CLIENT_HALT_MASK);
>>>>>>>> +
>>>>>>>> +		/* Halt all AXI requests on GBIF */
>>>>>>>> +		gpu_write(gpu, REG_A6XX_GBIF_HALT, GBIF_ARB_HALT_MASK);
>>>>>>>> +		spin_until((gpu_read(gpu, REG_A6XX_GBIF_HALT_ACK) &
>>>>>>>> +			   (GBIF_ARB_HALT_MASK)) == GBIF_ARB_HALT_MASK);
>>>>>>>> +
>>>>>>>> +		/* Clear the halts */
>>>>>>>> +		gpu_write(gpu, REG_A6XX_GBIF_HALT, 0);
>>>>>>>> +
>>>>>>>> +		gpu_write(gpu, REG_A6XX_RBBM_GBIF_HALT, 0);
>>>>>>>> +
>>>>>>>> +		/* This *really* needs to go through before we do anything else! */
>>>>>>>> +		mb();
>>>>>>>> +	}
>>>>>>>> +
>>>>>>>
>>>>>>> This sequence should be before we collapse cx gdsc. Also, please see if
>>>>>>> we can create a subroutine to avoid code dup.
>>>>>>>
>>>>>>>>  	pm_runtime_use_autosuspend(&gpu->pdev->dev);
>>>>>>>>  
>>>>>>>>  	if (active_submits)
>>>>>>>> @@ -1463,7 +1513,8 @@ static void a6xx_fault_detect_irq(struct msm_gpu *gpu)
>>>>>>>>  	 * Force the GPU to stay on until after we finish
>>>>>>>>  	 * collecting information
>>>>>>>>  	 */
>>>>>>>> -	gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_GMU_PWR_COL_KEEPALIVE, 1);
>>>>>>>> +	if (!adreno_has_gmu_wrapper(adreno_gpu))
>>>>>>>> +		gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_GMU_PWR_COL_KEEPALIVE, 1);
>>>>>>>>  
>>>>>>>>  	DRM_DEV_ERROR(&gpu->pdev->dev,
>>>>>>>>  		"gpu fault ring %d fence %x status %8.8X rb %4.4x/%4.4x ib1 %16.16llX/%4.4x ib2 %16.16llX/%4.4x\n",
>>>>>>>> @@ -1624,7 +1675,7 @@ static void a6xx_llc_slices_init(struct platform_device *pdev,
>>>>>>>>  		a6xx_gpu->llc_mmio = ERR_PTR(-EINVAL);
>>>>>>>>  }
>>>>>>>>  
>>>>>>>> -static int a6xx_pm_resume(struct msm_gpu *gpu)
>>>>>>>> +static int a6xx_gmu_pm_resume(struct msm_gpu *gpu)
>>>>>>>>  {
>>>>>>>>  	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
>>>>>>>>  	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
>>>>>>>> @@ -1644,10 +1695,61 @@ static int a6xx_pm_resume(struct msm_gpu *gpu)
>>>>>>>>  
>>>>>>>>  	a6xx_llc_activate(a6xx_gpu);
>>>>>>>>  
>>>>>>>> -	return 0;
>>>>>>>> +	return ret;
>>>>>>>>  }
>>>>>>>>  
>>>>>>>> -static int a6xx_pm_suspend(struct msm_gpu *gpu)
>>>>>>>> +static int a6xx_pm_resume(struct msm_gpu *gpu)
>>>>>>>> +{
>>>>>>>> +	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
>>>>>>>> +	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
>>>>>>>> +	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
>>>>>>>> +	unsigned long freq = 0;
>>>>>>>> +	struct dev_pm_opp *opp;
>>>>>>>> +	int ret;
>>>>>>>> +
>>>>>>>> +	gpu->needs_hw_init = true;
>>>>>>>> +
>>>>>>>> +	trace_msm_gpu_resume(0);
>>>>>>>> +
>>>>>>>> +	mutex_lock(&a6xx_gpu->gmu.lock);
>>>>>>> I think we can ignore gmu lock as there is no real gmu device.
>>>>>>>
>>>>>>>> +
>>>>>>>> +	pm_runtime_resume_and_get(gmu->dev);
>>>>>>>> +	pm_runtime_resume_and_get(gmu->gxpd);
>>>>>>>> +
>>>>>>>> +	/* Set the core clock, having VDD scaling in mind */
>>>>>>>> +	ret = dev_pm_opp_set_rate(&gpu->pdev->dev, gpu->fast_rate);
>>>>>>>> +	if (ret)
>>>>>>>> +		goto err_core_clk;
>>>>>>>> +
>>>>>>>> +	ret = clk_bulk_prepare_enable(gpu->nr_clocks, gpu->grp_clks);
>>>>>>>> +	if (ret)
>>>>>>>> +		goto err_bulk_clk;
>>>>>>>> +
>>>>>>>> +	ret = clk_prepare_enable(gpu->ebi1_clk);
>>>>>>>> +	if (ret)
>>>>>>>> +		goto err_mem_clk;
>>>>>>>> +
>>>>>>>> +	/* If anything goes south, tear the GPU down piece by piece.. */
>>>>>>>> +	if (ret) {
>>>>>>>> +err_mem_clk:
>>>>>>>> +		clk_bulk_disable_unprepare(gpu->nr_clocks, gpu->grp_clks);
>>>>>>>> +err_bulk_clk:
>>>>>>>> +		opp = dev_pm_opp_find_freq_ceil(&gpu->pdev->dev, &freq);
>>>>>>>> +		dev_pm_opp_put(opp);
>>>>>>>> +		dev_pm_opp_set_rate(&gpu->pdev->dev, 0);
>>>>>>>> +err_core_clk:
>>>>>>>> +		pm_runtime_put(gmu->gxpd);
>>>>>>>> +		pm_runtime_put(gmu->dev);
>>>>>>>> +	}
>>>>>>>> +	mutex_unlock(&a6xx_gpu->gmu.lock);
>>>>>>>> +
>>>>>>>> +	if (!ret)
>>>>>>>> +		msm_devfreq_resume(gpu);
>>>>>>>> +
>>>>>>>> +	return ret;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>> +static int a6xx_gmu_pm_suspend(struct msm_gpu *gpu)
>>>>>>>>  {
>>>>>>>>  	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
>>>>>>>>  	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
>>>>>>>> @@ -1674,11 +1776,62 @@ static int a6xx_pm_suspend(struct msm_gpu *gpu)
>>>>>>>>  	return 0;
>>>>>>>>  }
>>>>>>>>  
>>>>>>>> +static int a6xx_pm_suspend(struct msm_gpu *gpu)
>>>>>>>> +{
>>>>>>>> +	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
>>>>>>>> +	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
>>>>>>>> +	struct a6xx_gmu *gmu = &a6xx_gpu->gmu;
>>>>>>>> +	unsigned long freq = 0;
>>>>>>>> +	struct dev_pm_opp *opp;
>>>>>>>> +	int i, ret;
>>>>>>>> +
>>>>>>>> +	trace_msm_gpu_suspend(0);
>>>>>>>> +
>>>>>>>> +	opp = dev_pm_opp_find_freq_ceil(&gpu->pdev->dev, &freq);
>>>>>>>> +	dev_pm_opp_put(opp);
>>>>>>>> +
>>>>>>>> +	msm_devfreq_suspend(gpu);
>>>>>>>> +
>>>>>>>> +	mutex_lock(&a6xx_gpu->gmu.lock);
>>>>>>>> +
>>>>>>>> +	clk_disable_unprepare(gpu->ebi1_clk);
>>>>>>>> +
>>>>>>>> +	clk_bulk_disable_unprepare(gpu->nr_clocks, gpu->grp_clks);
>>>>>>>> +
>>>>>>>> +	/* Set frequency to the minimum supported level (no 27MHz on A6xx!) */
>>>>>>>> +	ret = dev_pm_opp_set_rate(&gpu->pdev->dev, freq);
>>>>>>>> +	if (ret)
>>>>>>>> +		goto err;
>>>>>>>> +
>>>>>>>> +	pm_runtime_put_sync(gmu->gxpd);
>>>>>>>> +	pm_runtime_put_sync(gmu->dev);
>>>>>>>> +
>>>>>>>> +	mutex_unlock(&a6xx_gpu->gmu.lock);
>>>>>>>> +
>>>>>>>> +	if (a6xx_gpu->shadow_bo)
>>>>>>>> +		for (i = 0; i < gpu->nr_rings; i++)
>>>>>>>> +			a6xx_gpu->shadow[i] = 0;
>>>>>>>> +
>>>>>>>> +	gpu->suspend_count++;
>>>>>>>> +
>>>>>>>> +	return 0;
>>>>>>>> +
>>>>>>>> +err:
>>>>>>>> +	mutex_unlock(&a6xx_gpu->gmu.lock);
>>>>>>>> +
>>>>>>>> +	return ret;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>>  static int a6xx_get_timestamp(struct msm_gpu *gpu, uint64_t *value)
>>>>>>>>  {
>>>>>>>>  	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
>>>>>>>>  	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
>>>>>>>>  
>>>>>>>> +	if (adreno_has_gmu_wrapper(adreno_gpu)) {
>>>>>>>> +		*value = gpu_read64(gpu, REG_A6XX_CP_ALWAYS_ON_COUNTER);
>>>>>>>> +		return 0;
>>>>>>>> +	}
>>>>>>>> +
>>>>>>> Instead of wrapper check here, we can just create a separate op. I don't
>>>>>>> see any benefit in reusing the same function here.
>>>>>>>
>>>>>>>
>>>>>>>>  	mutex_lock(&a6xx_gpu->gmu.lock);
>>>>>>>>  
>>>>>>>>  	/* Force the GPU power on so we can read this register */
>>>>>>>> @@ -1716,7 +1869,8 @@ static void a6xx_destroy(struct msm_gpu *gpu)
>>>>>>>>  		drm_gem_object_put(a6xx_gpu->shadow_bo);
>>>> 6xx_pm_suspend >>>>  	}
>>>>>>>>  
>>>>>>>> -	a6xx_llc_slices_destroy(a6xx_gpu);
>>>>>>>> +	if (!adreno_has_gmu_wrapper(adreno_gpu))
>>>>>>>> +		a6xx_llc_slices_destroy(a6xx_gpu);
>>>>>>>>  
>>>>>>>>  	mutex_lock(&a6xx_gpu->gmu.lock);
>>>>>>>>  	a6xx_gmu_remove(a6xx_gpu);
>>>>>>>> @@ -1957,8 +2111,8 @@ static const struct adreno_gpu_funcs funcs = {
>>>>>>>>  		.set_param = adreno_set_param,
>>>>>>>>  		.hw_init = a6xx_hw_init,
>>>>>>>>  		.ucode_load = a6xx_ucode_load,
>>>>>>>> -		.pm_suspend = a6xx_pm_suspend,
>>>>>>>> -		.pm_resume = a6xx_pm_resume,
>>>>>>>> +		.pm_suspend = a6xx_gmu_pm_suspend,
>>>>>>>> +		.pm_resume = a6xx_gmu_pm_resume,
>>>>>>>>  		.recover = a6xx_recover,
>>>>>>>>  		.submit = a6xx_submit,
>>>>>>>>  		.active_ring = a6xx_active_ring,
>>>>>>>> @@ -1982,6 +2136,35 @@ static const struct adreno_gpu_funcs funcs = {
>>>>>>>>  	.get_timestamp = a6xx_get_timestamp,
>>>>>>>>  };
>>>>>>>>  
>>>>>>>> +static const struct adreno_gpu_funcs funcs_gmuwrapper = {
>>>>>>>> +	.base = {
>>>>>>>> +		.get_param = adreno_get_param,
>>>>>>>> +		.set_param = adreno_set_param,
>>>>>>>> +		.hw_init = a6xx_hw_init,
>>>>>>>> +		.ucode_load = a6xx_ucode_load,
>>>>>>>> +		.pm_suspend = a6xx_pm_suspend,
>>>>>>>> +		.pm_resume = a6xx_pm_resume,
>>>>>>>> +		.recover = a6xx_recover,
>>>>>>>> +		.submit = a6xx_submit,
>>>>>>>> +		.active_ring = a6xx_active_ring,
>>>>>>>> +		.irq = a6xx_irq,
>>>>>>>> +		.destroy = a6xx_destroy,
>>>>>>>> +#if defined(CONFIG_DRM_MSM_GPU_STATE)
>>>>>>>> +		.show = a6xx_show,
>>>>>>>> +#endif
>>>>>>>> +		.gpu_busy = a6xx_gpu_busy,
>>>>>>>> +#if defined(CONFIG_DRM_MSM_GPU_STATE)
>>>>>>>> +		.gpu_state_get = a6xx_gpu_state_get,
>>>>>>>> +		.gpu_state_put = a6xx_gpu_state_put,
>>>>>>>> +#endif
>>>>>>>> +		.create_address_space = a6xx_create_address_space,
>>>>>>>> +		.create_private_address_space = a6xx_create_private_address_space,
>>>>>>>> +		.get_rptr = a6xx_get_rptr,
>>>>>>>> +		.progress = a6xx_progress,
>>>>>>>> +	},
>>>>>>>> +	.get_timestamp = a6xx_get_timestamp,
>>>>>>>> +};
>>>>>>>> +
>>>>>>>>  struct msm_gpu *a6xx_gpu_init(struct drm_device *dev)
>>>>>>>>  {
>>>>>>>>  	struct msm_drm_private *priv = dev->dev_private;
>>>>>>>> @@ -2003,18 +2186,36 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev)
>>>>>>>>  
>>>>>>>>  	adreno_gpu->registers = NULL;
>>>>>>>>  
>>>>>>>> +	/* Check if there is a GMU phandle and set it up */
>>>>>>>> +	node = of_parse_phandle(pdev->dev.of_node, "qcom,gmu", 0);
>>>>>>>> +	/* FIXME: How do we gracefully handle this? */
>>>>>>>> +	BUG_ON(!node);
>>>>>>> How will you handle this BUG() when there is no GMU (a610 gpu)?
>>>>>>>
>>>>>>>> +
>>>>>>>> +	adreno_gpu->gmu_is_wrapper = of_device_is_compatible(node, "qcom,adreno-gmu-wrapper");
>>>>>>>> +
>>>>>>>>  	/*
>>>>>>>>  	 * We need to know the platform type before calling into adreno_gpu_init
>>>>>>>>  	 * so that the hw_apriv flag can be correctly set. Snoop into the info
>>>>>>>>  	 * and grab the revision number
>>>>>>>>  	 */
>>>>>>>>  	info = adreno_info(config->rev);
>>>>>>>> -
>>>>>>>> -	if (info && (info->revn == 650 || info->revn == 660 ||
>>>>>>>> -			adreno_cmp_rev(ADRENO_REV(6, 3, 5, ANY_ID), info->rev)))
>>>>>>>> +	if (!info)
>>>>>>>> +		return ERR_PTR(-EINVAL);
>>>>>>>> +
>>>>>>>> +	/* Assign these early so that we can use the is_aXYZ helpers */
>>>>>>>> +	/* Numeric revision IDs (e.g. 630) */
>>>>>>>> +	adreno_gpu->revn = info->revn;
>>>>>>>> +	/* New-style ADRENO_REV()-only */
>>>>>>>> +	adreno_gpu->rev = info->rev;
>>>>>>>> +	/* Quirk data */
>>>>>>>> +	adreno_gpu->info = info;
>>>>>>>> +
>>>>>>>> +	if (adreno_is_a650(adreno_gpu) || adreno_is_a660_family(adreno_gpu))
>>>>>>>>  		adreno_gpu->base.hw_apriv = true;
>>>>>>>>  
>>>>>>>> -	a6xx_llc_slices_init(pdev, a6xx_gpu);
>>>>>>>> +	/* No LLCC on non-RPMh (and by extension, non-GMU) SoCs */
>>>>>>>> +	if (!adreno_has_gmu_wrapper(adreno_gpu))
>>>>>>>> +		a6xx_llc_slices_init(pdev, a6xx_gpu);
>>>>>>>>  
>>>>>>>>  	ret = a6xx_set_supported_hw(&pdev->dev, config->rev);
>>>>>>>>  	if (ret) {
>>>>>>>> @@ -2022,7 +2223,10 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev)
>>>>>>>>  		return ERR_PTR(ret);
>>>>>>>>  	}
>>>>>>>>  
>>>>>>>> -	ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs, 1);
>>>>>>>> +	if (adreno_has_gmu_wrapper(adreno_gpu))
>>>>>>>> +		ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs_gmuwrapper, 1);
>>>>>>>> +	else
>>>>>>>> +		ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs, 1);
>>>>>>>>  	if (ret) {
>>>>>>>>  		a6xx_destroy(&(a6xx_gpu->base.base));
>>>>>>>>  		return ERR_PTR(ret);
>>>>>>>> @@ -2035,13 +2239,10 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev)
>>>>>>>>  	if (adreno_is_a618(adreno_gpu) || adreno_is_7c3(adreno_gpu))
>>>>>>>>  		priv->gpu_clamp_to_idle = true;
>>>>>>>>  
>>>>>>>> -	/* Check if there is a GMU phandle and set it up */
>>>>>>>> -	node = of_parse_phandle(pdev->dev.of_node, "qcom,gmu", 0);
>>>>>>>> -
>>>>>>>> -	/* FIXME: How do we gracefully handle this? */
>>>>>>>> -	BUG_ON(!node);
>>>>>>>> -
>>>>>>>> -	ret = a6xx_gmu_init(a6xx_gpu, node);
>>>>>>>> +	if (adreno_has_gmu_wrapper(adreno_gpu))
>>>>>>>> +		ret = a6xx_gmu_wrapper_init(a6xx_gpu, node);
>>>>>>>> +	else
>>>>>>>> +		ret = a6xx_gmu_init(a6xx_gpu, node);
>>>>>>>>  	of_node_put(node);
>>>>>>>>  	if (ret) {
>>>>>>>>  		a6xx_destroy(&(a6xx_gpu->base.base));
>>>>>>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
>>>>>>>> index eea2e60ce3b7..51a7656072fa 100644
>>>>>>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
>>>>>>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
>>>>>>>> @@ -76,6 +76,7 @@ int a6xx_gmu_set_oob(struct a6xx_gmu *gmu, enum a6xx_gmu_oob_state state);
>>>>>>>>  void a6xx_gmu_clear_oob(struct a6xx_gmu *gmu, enum a6xx_gmu_oob_state state);
>>>>>>>>  
>>>>>>>>  int a6xx_gmu_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node);
>>>>>>>> +int a6xx_gmu_wrapper_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node);
>>>>>>>>  void a6xx_gmu_remove(struct a6xx_gpu *a6xx_gpu);
>>>>>>>>  
>>>>>>>>  void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp,
>>>>>>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c
>>>>>>>> index 30ecdff363e7..4e5d650578c6 100644
>>>>>>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c
>>>>>>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c
>>>>>>>> @@ -1041,16 +1041,18 @@ struct msm_gpu_state *a6xx_gpu_state_get(struct msm_gpu *gpu)
>>>>>>>>  	/* Get the generic state from the adreno core */
>>>>>>>>  	adreno_gpu_state_get(gpu, &a6xx_state->base);
>>>>>>>>  
>>>>>>>> -	a6xx_get_gmu_registers(gpu, a6xx_state);
>>>>>>>> +	if (!adreno_has_gmu_wrapper(adreno_gpu)) {
>>>>>>> nit: Kinda misleading function name to a layman. Should we invert the
>>>>>>> function to "adreno_has_gmu"?
>>>>>>>
>>>>>>> -Akhil
>>>>>>>> +		a6xx_get_gmu_registers(gpu, a6xx_state);
>>>>>>>>  
>>>>>>>> -	a6xx_state->gmu_log = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.log);
>>>>>>>> -	a6xx_state->gmu_hfi = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.hfi);
>>>>>>>> -	a6xx_state->gmu_debug = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.debug);
>>>>>>>> +		a6xx_state->gmu_log = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.log);
>>>>>>>> +		a6xx_state->gmu_hfi = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.hfi);
>>>>>>>> +		a6xx_state->gmu_debug = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.debug);
>>>>>>>>  
>>>>>>>> -	a6xx_snapshot_gmu_hfi_history(gpu, a6xx_state);
>>>>>>>> +		a6xx_snapshot_gmu_hfi_history(gpu, a6xx_state);
>>>>>>>> +	}
>>>>>>>>  
>>>>>>>>  	/* If GX isn't on the rest of the data isn't going to be accessible */
>>>>>>>> -	if (!a6xx_gmu_gx_is_on(&a6xx_gpu->gmu))
>>>>>>>> +	if (!adreno_has_gmu_wrapper(adreno_gpu) && !a6xx_gmu_gx_is_on(&a6xx_gpu->gmu))
>>>>>>>>  		return &a6xx_state->base;
>>>>>>>>  
>>>>>>>>  	/* Get the banks of indexed registers */
>>>>>>>> diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
>>>>>>>> index 6934cee07d42..5c5901d65950 100644
>>>>>>>> --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
>>>>>>>> +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
>>>>>>>> @@ -528,6 +528,10 @@ int adreno_load_fw(struct adreno_gpu *adreno_gpu)
>>>>>>>>  		if (!adreno_gpu->info->fw[i])
>>>>>>>>  			continue;
>>>>>>>>  
>>>>>>>> +		/* Skip loading GMU firwmare with GMU Wrapper */
>>>>>>>> +		if (adreno_has_gmu_wrapper(adreno_gpu) && i == ADRENO_FW_GMU)
>>>>>>>> +			continue;
>>>>>>>> +
>>>>>>>>  		/* Skip if the firmware has already been loaded */
>>>>>>>>  		if (adreno_gpu->fw[i])
>>>>>>>>  			continue;
>>>>>>>> @@ -1074,8 +1078,8 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev,
>>>>>>>>  	u32 speedbin;
>>>>>>>>  	int ret;
>>>>>>>>  
>>>>>>>> -	/* Only handle the core clock when GMU is not in use */
>>>>>>>> -	if (config->rev.core < 6) {
>>>>>>>> +	/* Only handle the core clock when GMU is not in use (or is absent). */
>>>>>>>> +	if (adreno_has_gmu_wrapper(adreno_gpu) || config->rev.core < 6) {
>>>>>>>>  		/*
>>>>>>>>  		 * This can only be done before devm_pm_opp_of_add_table(), or
>>>>>>>>  		 * dev_pm_opp_set_config() will WARN_ON()
>>>>>>>> diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.h b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
>>>>>>>> index f62612a5c70f..ee5352bc5329 100644
>>>>>>>> --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.h
>>>>>>>> +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
>>>>>>>> @@ -115,6 +115,7 @@ struct adreno_gpu {
>>>>>>>>  	 * code (a3xx_gpu.c) and stored in this common location.
>>>>>>>>  	 */
>>>>>>>>  	const unsigned int *reg_offsets;
>>>>>>>> +	bool gmu_is_wrapper;
>>>>>>>>  };
>>>>>>>>  #define to_adreno_gpu(x) container_of(x, struct adreno_gpu, base)
>>>>>>>>  
>>>>>>>> @@ -145,6 +146,11 @@ struct adreno_platform_config {
>>>>>>>>  
>>>>>>>>  bool adreno_cmp_rev(struct adreno_rev rev1, struct adreno_rev rev2);
>>>>>>>>  
>>>>>>>> +static inline bool adreno_has_gmu_wrapper(struct adreno_gpu *gpu)
>>>>>>>> +{
>>>>>>>> +	return gpu->gmu_is_wrapper;
>>>>>>>> +}
>>>>>>>> +
>>>>>>>>  static inline bool adreno_is_a2xx(struct adreno_gpu *gpu)
>>>>>>>>  {
>>>>>>>>  	return (gpu->revn < 300);
>>>>>>>>
>>>>>>>> -- 
>>>>>>>> 2.40.0
>>>>>>>>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux