On 7.05.2023 21:07, Dmitry Baryshkov wrote:
> Enable MDSS, GPU and DSI panel output on the APQ8074 dragonboard.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
> .../arm/boot/dts/qcom-apq8074-dragonboard.dts | 51 +++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
> index c893afc00eb4..72f7e09a5bbf 100644
> --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
> +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
> @@ -48,6 +48,57 @@ eeprom: eeprom@52 {
> };
> };
>
> +&dsi0 {
old junk could use some mdss_ prefixing to keep the nodes together
Could you please take care of that?
> + vdda-supply = <&pm8941_l2>;
> + vdd-supply = <&pm8941_l22>;
> + vddio-supply = <&pm8941_l12>;
> +
> + status = "okay";
> +
> + panel: panel@0 {
> + compatible = "sharp,ls043t1le01-qhd";
> + reg = <0>;
> +
> + avdd-supply = <&pm8941_l22>;
> + backlight = <&pm8941_wled>;
> + reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> + };
> +};
> +
> +&dsi0_out {
> + remote-endpoint = <&panel_in>;
> + data-lanes = <0 1 2 3>;
> +};
> +
> +&dsi0_phy {
> + status = "okay";
> +
> + vddio-supply = <&pm8941_l12>;
status last
Konrad
> +};
> +
> +&gpu {
> + status = "okay";
> +};
> +
> +&mdss {
> + status = "okay";
> +};
> +
> +&pm8941_wled {
> + qcom,cs-out;
> + qcom,switching-freq = <3200>;
> + qcom,ovp = <32>;
> + qcom,num-strings = <1>;
> +
> + status = "okay";
> +};
> +
> &remoteproc_adsp {
> cx-supply = <&pm8841_s2>;
>
