Wrap existing pwrkey and new resin nodes into the new pon node to enable
volume-down key support on platforms using pm8941 PMIC.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-pm8941.dtsi | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index a821f0368a28..ce30946ccf58 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -19,12 +19,24 @@ rtc@6000 {
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
- pwrkey@800 {
- compatible = "qcom,pm8941-pwrkey";
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
reg = <0x800>;
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ };
+
+ pm8941_resin: resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ status = "disabled";
+ };
};
usb_id: usb-detect@900 {
--
2.39.2
