Re: [PATCH 5/6] ARM: dts: msm8226: Add tsens node and related nvmem cells

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sonntag, 7. Mai 2023 22:12:23 CEST Matti Lehtimäki wrote:
> Specify pre-parsed per-sensor calibration nvmem cells in the qfprom
> device node rather than parsing the whole data blob in the driver.

I haven't double checked all the qfprom offsets but since you verified it
twice on your side, I believe you ;)

Reviewed-by: Luca Weiss <luca@xxxxxxxxx>

> 
> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/qcom-msm8226.dtsi | 113 ++++++++++++++++++++++++++++
>  1 file changed, 113 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi
> b/arch/arm/boot/dts/qcom-msm8226.dtsi index c34b8f3139ae..a0c3d25eea65
> 100644
> --- a/arch/arm/boot/dts/qcom-msm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
> @@ -500,6 +500,34 @@ data-pins {
>  			};
>  		};
> 
> +		tsens: thermal-sensor@fc4a9000 {
> +			compatible = "qcom,msm8226-tsens", "qcom,tsens-v0_1";
> +			reg = <0xfc4a9000 0x1000>, /* TM */
> +			      <0xfc4a8000 0x1000>; /* SROT */
> +			nvmem-cells = <&tsens_mode>,
> +				      <&tsens_base1>, <&tsens_base2>,
> +				      <&tsens_s0_p1>, <&tsens_s0_p2>,
> +				      <&tsens_s1_p1>, <&tsens_s1_p2>,
> +				      <&tsens_s2_p1>, <&tsens_s2_p2>,
> +				      <&tsens_s3_p1>, <&tsens_s3_p2>,
> +				      <&tsens_s4_p1>, <&tsens_s4_p2>,
> +				      <&tsens_s5_p1>, <&tsens_s5_p2>,
> +				      <&tsens_s6_p1>, <&tsens_s6_p2>;
> +			nvmem-cell-names = "mode",
> +					   "base1", "base2",
> +					   "s0_p1", "s0_p2",
> +					   "s1_p1", "s1_p2",
> +					   "s2_p1", "s2_p2",
> +					   "s3_p1", "s3_p2",
> +					   "s4_p1", "s4_p2",
> +					   "s5_p1", "s5_p2",
> +					   "s6_p1", "s6_p2";
> +			#qcom,sensors = <6>;
> +			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow";
> +			#thermal-sensor-cells = <1>;
> +		};
> +
>  		restart@fc4ab000 {
>  			compatible = "qcom,pshold";
>  			reg = <0xfc4ab000 0x4>;
> @@ -510,6 +538,91 @@ qfprom: qfprom@fc4bc000 {
>  			reg = <0xfc4bc000 0x1000>;
>  			#address-cells = <1>;
>  			#size-cells = <1>;
> +
> +			tsens_base1: base1@1c1 {
> +				reg = <0x1c1 0x2>;
> +				bits = <5 8>;
> +			};
> +
> +			tsens_s0_p1: s0-p1@1c2 {
> +				reg = <0x1c2 0x2>;
> +				bits = <5 6>;
> +			};
> +
> +			tsens_s1_p1: s1-p1@1c4 {
> +				reg = <0x1c4 0x1>;
> +				bits = <0 6>;
> +			};
> +
> +			tsens_s2_p1: s2-p1@1c4 {
> +				reg = <0x1c4 0x2>;
> +				bits = <6 6>;
> +			};
> +
> +			tsens_s3_p1: s3-p1@1c5 {
> +				reg = <0x1c5 0x2>;
> +				bits = <4 6>;
> +			};
> +
> +			tsens_s4_p1: s4-p1@1c6 {
> +				reg = <0x1c6 0x1>;
> +				bits = <2 6>;
> +			};
> +
> +			tsens_s5_p1: s5-p1@1c7 {
> +				reg = <0x1c7 0x1>;
> +				bits = <0 6>;
> +			};
> +
> +			tsens_s6_p1: s6-p1@1ca {
> +				reg = <0x1ca 0x2>;
> +				bits = <4 6>;
> +			};
> +
> +			tsens_base2: base2@1cc {
> +				reg = <0x1cc 0x1>;
> +				bits = <0 8>;
> +			};
> +
> +			tsens_s0_p2: s0-p2@1cd {
> +				reg = <0x1cd 0x1>;
> +				bits = <0 6>;
> +			};
> +
> +			tsens_s1_p2: s1-p2@1cd {
> +				reg = <0x1cd 0x2>;
> +				bits = <6 6>;
> +			};
> +
> +			tsens_s2_p2: s2-p2@1ce {
> +				reg = <0x1ce 0x2>;
> +				bits = <4 6>;
> +			};
> +
> +			tsens_s3_p2: s3-p2@1cf {
> +				reg = <0x1cf 0x1>;
> +				bits = <2 6>;
> +			};
> +
> +			tsens_s4_p2: s4-p2@446 {
> +				reg = <0x446 0x2>;
> +				bits = <4 6>;
> +			};
> +
> +			tsens_s5_p2: s5-p2@447 {
> +				reg = <0x447 0x1>;
> +				bits = <2 6>;
> +			};
> +
> +			tsens_s6_p2: s6-p2@44e {
> +				reg = <0x44e 0x1>;
> +				bits = <1 6>;
> +			};
> +
> +			tsens_mode: mode@44f {
> +				reg = <0x44f 0x1>;
> +				bits = <5 3>;
> +			};
>  		};
> 
>  		spmi_bus: spmi@fc4cf000 {








[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux