[RFC PATCH v1 0/3] drm/msm: add support for HDMI on msm8974

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds support for the HDMI output on the msm8974 platform. It
was tested on the apq8074 dragonboard device.

I'm sending this as an RFC for two reasons:
- The series depends on the other patchset ([1]), which got no feedback
  yet.
- I'm looking at refactoring the HDMI PHY support. I tink it makes
  little sense to land the PHY driver when we know that it is going to
  be reworked during the same development cycle.

[1] https://patchwork.freedesktop.org/series/117431/

Brian Masney (1):
  drm/msm/hdmi: add msm8974 PLL support

Dmitry Baryshkov (2):
  ARM: dts: qcom: msm8974: add support for the HDMI output
  ARM: dts: qcom: apq8074-dragonboard: enable HDMI output

 .../arm/boot/dts/qcom-apq8074-dragonboard.dts |  30 +
 arch/arm/boot/dts/qcom-msm8974.dtsi           |  90 ++-
 drivers/gpu/drm/msm/Makefile                  |   1 +
 drivers/gpu/drm/msm/hdmi/hdmi.h               |   6 +
 drivers/gpu/drm/msm/hdmi/hdmi_phy.c           |   4 +-
 drivers/gpu/drm/msm/hdmi/hdmi_pll_8974.c      | 689 ++++++++++++++++++
 6 files changed, 818 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/msm/hdmi/hdmi_pll_8974.c

-- 
2.39.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux