Re-order the clocks for MMCC clock controller node to match the bindings (Linux
driver takes by name):
msm8996-mtp.dtb: clock-controller@8c0000: clock-names:1: 'gpll0' was expected
msm8996-mtp.dtb: clock-controller@8c0000: clock-names:2: 'gcc_mmss_noc_cfg_ahb_clk' was expected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index fe9e1cb12a73..718007cfb10e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -939,16 +939,16 @@ mmcc: clock-controller@8c0000 {
#power-domain-cells = <1>;
reg = <0x008c0000 0x40000>;
clocks = <&xo_board>,
- <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
<&gcc GPLL0>,
+ <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
<&dsi0_phy 1>,
<&dsi0_phy 0>,
<&dsi1_phy 1>,
<&dsi1_phy 0>,
<&hdmi_phy>;
clock-names = "xo",
- "gcc_mmss_noc_cfg_ahb_clk",
"gpll0",
+ "gcc_mmss_noc_cfg_ahb_clk",
"dsi0pll",
"dsi0pllbyte",
"dsi1pll",
--
2.34.1
