This types of NAND partitions appear in OpenWrt and U-Boot. Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- .../devicetree/bindings/mtd/partitions/seama.yaml | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/Documentation/devicetree/bindings/mtd/partitions/seama.yaml b/Documentation/devicetree/bindings/mtd/partitions/seama.yaml new file mode 100644 index 000000000000..352f008ffdb1 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/seama.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/seama.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Seattle Image Partitions + +description: The SEAttle iMAge (SEAMA) partition is a type of partition + used for NAND flash devices. This type of flash image is found in some + D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, + DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79 + (MIPS), Broadcom BCM53xx, and RAMIPS platforms. + +maintainers: + - Linus Walleij <linus.walleij@xxxxxxxxxx> + +select: false + +properties: + compatible: + const: seama + + '#address-cells': false + + '#size-cells': false + +patternProperties: + "@[0-9a-f]+$": + $ref: partition.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + flash { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + firmware@0 { + compatible = "seama"; + label = "firmware"; + reg = <0x00000000 0x08000000>; + }; + }; + }; -- 2.34.1
