Add property "qcom,dsb-msrs-num" to support DSB(Discrete Single Bit) MSR(mux select register) for TPDM. It specifies the number of MSR registers supported by the DSB TDPM. Signed-off-by: Tao Zhang <quic_taozha@xxxxxxxxxxx> --- Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml index 932c55b..cbd746d 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml @@ -52,6 +52,15 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [32, 64] + qcom,dsb-msrs-num: + description: + Specifies the number of DSB(Discrete Single Bit) MSR(mux select register) + registers supported by the monitor. If this property is not configured + or set to 0, it means this DSB TPDM doesn't support MSR. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 32 + clocks: maxItems: 1 -- 2.7.4