This commits are based on the Fabien Parent <fparent@xxxxxxxxxxxx> work. The purpose of this series is to add the following HWs / IPs support for the mt8365-evk board: - Watchdog - Power Management Integrated Circuit "PMIC" wrapper - MT6357 PMIC - MultiMediaCard "MMC" & Secure Digital "SD" controller - USB controller - Ethernet MAC controller Add CPU Freq & IDLE support for this board. This series depends to anothers which add support for MT8365 EVK board [1], add the MT8365 I2C support [2] (both are currently applied) and finally the pinctrl binding cleanup [3]. === Build: To test this serie, cherry-pick patches from the dependent series ([1],[2],[3]) and the applied patches from this serie (documented in the "Changes" below). Be carefull, the pinctrl serie [3] is rebased to linusw/linux-pinctrl, cherry-pick will not be straightforward. Finally, cherry-pick this serie. You can also take my branch [4] which have all the needed patches retrieved from the instructions above. Use the arm64 defconfig to make the build. Regards, Alex [1]: https://lore.kernel.org/all/20230309213501.794764-1-bero@xxxxxxxxxxxx/ [2]: https://lore.kernel.org/all/20221122-mt8365-i2c-support-v6-0-e1009c8afd53@xxxxxxxxxxxx/ [3]: https://lore.kernel.org/all/20230327-cleanup-pinctrl-binding-v3-0-6f56d5c7a8de@xxxxxxxxxxxx/ [4]: https://gitlab.baylibre.com/baylibre/mediatek/bsp/linux/-/commits/amergnat/i350-evk-board-support Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx> --- Changes in v6: - Add commit message for the arm64 defconfig changes - Fix the mail list - Link to v5: https://lore.kernel.org/r/20230203-evk-board-support-v5-0-1883c1b405ad@xxxxxxxxxxxx Changes in v5: - Add patches to build the MT6357 regulator driver and MTK PMIC keys by default - Remove "dt-bindings: pinctrl: mediatek,mt8365-pinctrl: add drive strength property" patch from this serie and add it to the pinctrl serie [3] - Link to v4: https://lore.kernel.org/r/20230203-evk-board-support-v4-0-5cffe66a38c0@xxxxxxxxxxxx Changes in v4: - Remove v3 applied patch from the serie: - arm64: dts: mediatek: add ethernet support for mt8365 SoC - arm64: dts: mediatek: add mmc support for mt8365 SoC - arm64: dts: mediatek: add mt6357 device-tree - arm64: dts: mediatek: add pwrap support to mt8365 SoC - arm64: dts: mediatek: Increase the size BL31 reserved memory - Drop "arm64: dts: mediatek: fix systimer properties" which is done [1] - Fix style, typo and re-order properties. - Use interrupts-extended for the PMIC node. - Link to v3: https://lore.kernel.org/r/20230203-evk-board-support-v3-0-0003e80e0095@xxxxxxxxxxxx Changes in v3: - Remove v2 applied patch from the serie: - dt-bindings: mmc: mediatek,mtk-sd: add mt8365 - Add trailers and simply resend. - Link to v2: https://lore.kernel.org/r/20230203-evk-board-support-v2-0-6ec7cdb10ccf@xxxxxxxxxxxx --- Alexandre Mergnat (10): arm64: defconfig: enable MT6357 regulator arm64: defconfig: enable Mediatek PMIC key dt-bindings: watchdog: mediatek,mtk-wdt: add mt8365 arm64: dts: mediatek: add watchdog support for mt8365 SoC arm64: dts: mediatek: add mt6357 PMIC support for mt8365-evk arm64: dts: mediatek: add mmc support for mt8365-evk arm64: dts: mediatek: add usb controller support for mt8365-evk arm64: dts: mediatek: add ethernet support for mt8365-evk arm64: dts: mediatek: add OPP support for mt8365 SoC arm64: dts: mediatek: add cpufreq support for mt8365-evk Amjad Ouled-Ameur (1): arm64: dts: mediatek: Add CPU Idle support Fabien Parent (1): arm64: dts: mediatek: set vmc regulator as always on .../bindings/watchdog/mediatek,mtk-wdt.yaml | 1 + arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 249 +++++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt8365.dtsi | 142 ++++++++++++ arch/arm64/configs/defconfig | 2 + 4 files changed, 394 insertions(+) --- base-commit: 4f2a499a344b36ebb325e610265452ea88541116 change-id: 20230203-evk-board-support-d5b7a839ed7b Best regards, -- Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
