From: Nishanth Menon <nm@xxxxxx> wkup_uart and main_uart1 on this platform is used by tifs and DM firmwares. Describe them for completeness including the pinmux. Signed-off-by: Nishanth Menon <nm@xxxxxx> [bb@xxxxxx: updated pinmux and commit subject] Signed-off-by: Bryan Brattlof <bb@xxxxxx> --- Changes from v2: [1] - Included the patch version to the $subject Changes from v1: [0] - Updated $subject to align with previous commits [1] https://lore.kernel.org/lkml/20230425214311.546191-1-bb@xxxxxx/ [0] https://lore.kernel.org/linux-devicetree/20230424183355.68360-1-bb@xxxxxx/ arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 40 +++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index f6a67f072dca6..65caa5611d6d5 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -17,7 +17,9 @@ / { model = "Texas Instruments AM62A7 SK"; aliases { + serial0 = &wkup_uart0; serial2 = &main_uart0; + serial3 = &main_uart1; mmc1 = &sdhci1; }; @@ -114,11 +116,38 @@ led-0 { }; }; +&mcu_pmx0 { + wkup_uart0_pins_default: wkup-uart0-pins-default { + pinctrl-single,pins = < + AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */ + AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */ + AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */ + AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */ + >; + }; +}; + +/* WKUP UART0 is used for DM firmware logs */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + status = "reserved"; +}; + &main_pmx0 { main_uart0_pins_default: main-uart0-pins-default { pinctrl-single,pins = < - AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ - AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */ + AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */ + >; + }; + + main_uart1_pins_default: main-uart1-pins-default { + pinctrl-single,pins = < + AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */ + AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */ + AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */ + AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */ >; }; @@ -254,6 +283,13 @@ &main_uart0 { pinctrl-0 = <&main_uart0_pins_default>; }; +/* Main UART1 is used for TIFS firmware logs */ +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + status = "reserved"; +}; + &usbss1 { status = "okay"; }; base-commit: 891db0c48efb48c3af334006f9d7ea6a0aa49cb9 -- 2.40.0
