After renaming NAND controller node name from "qpic-nand" to
"nand-controller", the board DTS/DTSI also have to be updated:
Warning (unit_address_vs_reg): /soc/qpic-nand@79b0000: node has a unit name, but no reg or ranges property
Cc: <stable@xxxxxxxxxxxxxxx>
Fixes: 9e1e00f18afc ("ARM: dts: qcom: Fix node name for NAND controller node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 8 ++++----
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 10 +++++-----
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 12 ++++++------
3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index 79b0c6318e52..0993f840d1fc 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -11,9 +11,9 @@ soc {
dma-controller@7984000 {
status = "okay";
};
-
- qpic-nand@79b0000 {
- status = "okay";
- };
};
};
+
+&nand {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index a63b3778636d..468ebc40d2ad 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -102,10 +102,10 @@ pci@40000000 {
status = "okay";
perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
};
-
- qpic-nand@79b0000 {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- };
};
};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
index 0107f552f520..7ef635997efa 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -65,11 +65,11 @@ i2c@78b7000 { /* BLSP1 QUP2 */
dma-controller@7984000 {
status = "okay";
};
-
- qpic-nand@79b0000 {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
};
};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--
2.34.1
