Re: [PATCH V3 1/2] dt-bindings: interrupt-controller: Add Loongson EIOINTC

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 19/04/2023 09:17, Binbin Zhou wrote:
> Add Loongson Extended I/O Interrupt controller binding with DT schema
> format using json-schema.
> 
> Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
> ---
>  .../loongson,eiointc.yaml                     | 74 +++++++++++++++++++
>  1 file changed, 74 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
> new file mode 100644
> index 000000000000..4ab4efb061e1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
> @@ -0,0 +1,74 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/loongson,eiointc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson Extended I/O Interrupt Controller
> +
> +maintainers:
> +  - Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
> +
> +description: |
> +  This interrupt controller is found on the Loongson-3 family chips and
> +  Loongson-2K series chips and is used to distribute interrupts directly to
> +  individual cores without forwarding them through the HT's interrupt line.
> +
> +allOf:
> +  - $ref: /schemas/interrupt-controller.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - loongson,ls2k0500-eiointc
> +      - loongson,ls2k2000-eiointc
> +
> +  reg:
> +    items:
> +      - description: Interrupt enable registers
> +      - description: Interrupt status registers
> +      - description: Interrupt clear registers
> +      - description: Interrupt routing configuration registers
> +
> +  reg-names:
> +    items:
> +      - const: enable
> +      - const: status
> +      - const: clear
> +      - const: route
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    eiointc: interrupt-controller@1fe11600 {
> +      compatible = "loongson,ls2k0500-eiointc";
> +      reg = <0x1fe11600 0x10>,
> +            <0x1fe11700 0x10>,
> +            <0x1fe11800 0x10>,
> +            <0x1fe114c0 0x4>;

Binding is OK, but are you sure you want to split the address space like
this? It looks like two address spaces (enable+clear+status should be
one). Are you sure this is correct?

Best regards,
Krzysztof