On 18.04.2023 18:43, Luca Weiss wrote:
> The PMI632, commonly found on SoCs with SDM632 has various standard
> functions like ADC, GPIOs, LPG and more.
>
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
Looks good!
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/pmi632.dtsi | 165 +++++++++++++++++++++++++++++++++++
> 1 file changed, 165 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
> new file mode 100644
> index 000000000000..4eb79e0ce40a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
> @@ -0,0 +1,165 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (C) 2023 Luca Weiss <luca@xxxxxxxxx>
> + */
> +
> +#include <dt-bindings/iio/qcom,spmi-vadc.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +
> +/ {
> + thermal-zones {
> + pmi632-thermal {
> + polling-delay-passive = <100>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&pmi632_temp>;
> +
> + trips {
> + trip0 {
> + temperature = <95000>;
> + hysteresis = <0>;
> + type = "passive";
> + };
> +
> + trip1 {
> + temperature = <115000>;
> + hysteresis = <0>;
> + type = "hot";
> + };
> +
> + trip2 {
> + temperature = <125000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> + };
> + };
> +};
> +
> +&spmi_bus {
> + pmic@2 {
> + compatible = "qcom,pmi632", "qcom,spmi-pmic";
> + reg = <0x2 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pmi632_temp: temp-alarm@2400 {
> + compatible = "qcom,spmi-temp-alarm";
> + reg = <0x2400>;
> + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
> + #thermal-sensor-cells = <0>;
> + };
> +
> + pmi632_adc: adc@3100 {
> + compatible = "qcom,spmi-adc5";
> + reg = <0x3100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #io-channel-cells = <1>;
> + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> +
> + channel@0 {
> + reg = <ADC5_REF_GND>;
> + qcom,pre-scaling = <1 1>;
> + label = "ref_gnd";
> + };
> +
> + channel@1 {
> + reg = <ADC5_1P25VREF>;
> + qcom,pre-scaling = <1 1>;
> + label = "vref_1p25";
> + };
> +
> + channel@6 {
> + reg = <ADC5_DIE_TEMP>;
> + qcom,pre-scaling = <1 1>;
> + label = "die_temp";
> + };
> +
> + channel@7 {
> + reg = <ADC5_USB_IN_I>;
> + qcom,pre-scaling = <1 1>;
> + label = "usb_in_i_uv";
> + };
> +
> + channel@8 {
> + reg = <ADC5_USB_IN_V_16>;
> + qcom,pre-scaling = <1 16>;
> + label = "usb_in_v_div_16";
> + };
> +
> + channel@9 {
> + reg = <ADC5_CHG_TEMP>;
> + qcom,pre-scaling = <1 1>;
> + label = "chg_temp";
> + };
> +
> + channel@4b {
> + reg = <ADC5_BAT_ID_100K_PU>;
> + qcom,hw-settle-time = <200>;
> + qcom,pre-scaling = <1 1>;
> + qcom,ratiometric;
> + label = "bat_id";
> + };
> +
> + channel@83 {
> + reg = <ADC5_VPH_PWR>;
> + qcom,pre-scaling = <1 3>;
> + label = "vph_pwr";
> + };
> +
> + channel@84 {
> + reg = <ADC5_VBAT_SNS>;
> + qcom,pre-scaling = <1 3>;
> + label = "vbat_sns";
> + };
> + };
> +
> + pmi632_adc_tm: adc-tm@3500 {
> + compatible = "qcom,spmi-adc-tm5";
> + reg = <0x3500>;
> + interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> + #thermal-sensor-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + pmi632_sdam_7: nvram@b600 {
> + compatible = "qcom,spmi-sdam";
> + reg = <0xb600>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0xb600 0x100>;
> + };
> +
> + pmi632_gpios: gpio@c000 {
> + compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + gpio-ranges = <&pmi632_gpios 0 0 8>;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + pmic@3 {
> + compatible = "qcom,pmi632", "qcom,spmi-pmic";
> + reg = <0x3 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pmi632_lpg: pwm {
> + compatible = "qcom,pmi632-lpg";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #pwm-cells = <2>;
> +
> + status = "disabled";
> + };
> + };
> +};
>
