Add support for the PMI632 PMIC in the spmi-gpio & qcom-lpg driver, add the dtsi for the PMIC and enable the notification LED on fairphone-fp3. Signed-off-by: Luca Weiss <luca@xxxxxxxxx> --- Changes in v2: - Add qcom,pmi632-gpio to all the needed places in yaml - Add patch documenting led path - Pick up tags - Drop vadc pre-scaling patch since it was applied - Link to v1: https://lore.kernel.org/r/20230414-pmi632-v1-0-fe94dc414832@xxxxxxxxx --- Luca Weiss (8): dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632 pinctrl: qcom: spmi-gpio: Add PMI632 support dt-bindings: leds: qcom-lpg: Add compatible for PMI632 LPG block leds: qcom-lpg: Add support for PMI632 LPG dt-bindings: mfd: qcom-spmi-pmic: Add PMI632 compatible arm64: dts: qcom: Add PMI632 PMIC arm64: dts: qcom: sdm632-fairphone-fp3: Add notification LED Documentation: leds: Add "rgb:status" path .../devicetree/bindings/leds/leds-qcom-lpg.yaml | 1 + .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 1 + .../bindings/pinctrl/qcom,pmic-gpio.yaml | 3 + Documentation/leds/well-known-leds.txt | 1 + arch/arm64/boot/dts/qcom/pmi632.dtsi | 165 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 29 ++++ drivers/leds/rgb/leds-qcom-lpg.c | 15 ++ drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 + 8 files changed, 216 insertions(+) --- base-commit: 3f49aa65798675341eb9d4f947c40558564b2e6d change-id: 20230414-pmi632-4ae03225ae75 Best regards, -- Luca Weiss <luca@xxxxxxxxx>
