The Amlogic A1 uses dwc2 Synopsys IP as its USB peripheral (gadget)
endpoint, with different DWC2 parameters when compared to previous
Amlogic SoCs.
Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>
---
drivers/usb/dwc2/params.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 9ed9fd956940..098fbfc774ab 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -161,6 +161,25 @@ static void dwc2_set_amlogic_g12a_params(struct dwc2_hsotg *hsotg)
p->hird_threshold_en = false;
}
+static void dwc2_set_amlogic_a1_params(struct dwc2_hsotg *hsotg)
+{
+ struct dwc2_core_params *p = &hsotg->params;
+
+ p->otg_caps.hnp_support = false;
+ p->otg_caps.srp_support = false;
+ p->speed = DWC2_SPEED_PARAM_HIGH;
+ p->host_rx_fifo_size = 192;
+ p->host_nperio_tx_fifo_size = 128;
+ p->host_perio_tx_fifo_size = 128;
+ p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
+ p->phy_utmi_width = 8;
+ p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 << GAHBCFG_HBSTLEN_SHIFT;
+ p->lpm = false;
+ p->lpm_clock_gating = false;
+ p->besl = false;
+ p->hird_threshold_en = false;
+}
+
static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
@@ -258,6 +277,8 @@ const struct of_device_id dwc2_of_match_table[] = {
.data = dwc2_set_amlogic_params },
{ .compatible = "amlogic,meson-g12a-usb",
.data = dwc2_set_amlogic_g12a_params },
+ { .compatible = "amlogic,meson-a1-usb",
+ .data = dwc2_set_amlogic_a1_params },
{ .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params },
{ .compatible = "apm,apm82181-dwc-otg", .data = dwc2_set_amcc_params },
{ .compatible = "st,stm32f4x9-fsotg",
--
2.36.0
