The Ux500 is device tree-only since ages. Delete the platform data header and push it into or next to the driver instead. Drop the non-DT probe path since this will not happen. Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- drivers/dma/ste_dma40.c | 56 ++++++++---- .../dma-ste-dma40.h => drivers/dma/ste_dma40.h | 101 +-------------------- drivers/dma/ste_dma40_ll.c | 3 +- 3 files changed, 41 insertions(+), 119 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index ef2a2fdaa82e..e5df28cdc4c8 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -23,11 +23,39 @@ #include <linux/of_dma.h> #include <linux/amba/bus.h> #include <linux/regulator/consumer.h> -#include <linux/platform_data/dma-ste-dma40.h> #include "dmaengine.h" +#include "ste_dma40.h" #include "ste_dma40_ll.h" +/** + * struct stedma40_platform_data - Configuration struct for the dma device. + * + * @dev_tx: mapping between destination event line and io address + * @dev_rx: mapping between source event line and io address + * @disabled_channels: A vector, ending with -1, that marks physical channels + * that are for different reasons not available for the driver. + * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW + * which avoids HW bug that exists in some versions of the controller. + * SoftLLI introduces relink overhead that could impact performace for + * certain use cases. + * @num_of_soft_lli_chans: The number of channels that needs to be configured + * to use SoftLLI. + * @use_esram_lcla: flag for mapping the lcla into esram region + * @num_of_memcpy_chans: The number of channels reserved for memcpy. + * @num_of_phy_chans: The number of physical channels implemented in HW. + * 0 means reading the number of channels from DMA HW but this is only valid + * for 'multiple of 4' channels, like 8. + */ +struct stedma40_platform_data { + int disabled_channels[STEDMA40_MAX_PHYS]; + int *soft_lli_chans; + int num_of_soft_lli_chans; + bool use_esram_lcla; + int num_of_memcpy_chans; + int num_of_phy_chans; +}; + #define D40_NAME "dma40" #define D40_PHY_CHAN -1 @@ -2269,7 +2297,7 @@ d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src, return NULL; } -bool stedma40_filter(struct dma_chan *chan, void *data) +static bool stedma40_filter(struct dma_chan *chan, void *data) { struct stedma40_chan_cfg *info = data; struct d40_chan *d40c = @@ -2288,7 +2316,6 @@ bool stedma40_filter(struct dma_chan *chan, void *data) return err == 0; } -EXPORT_SYMBOL(stedma40_filter); static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src) { @@ -3517,16 +3544,9 @@ static int __init d40_probe(struct platform_device *pdev) int num_reserved_chans; u32 val; - if (!plat_data) { - if (np) { - if (d40_of_probe(pdev, np)) { - ret = -ENOMEM; - goto report_failure; - } - } else { - d40_err(dev, "No pdata or Device Tree provided\n"); - goto report_failure; - } + if (d40_of_probe(pdev, np)) { + ret = -ENOMEM; + goto report_failure; } base = d40_hw_detect_init(pdev); @@ -3650,11 +3670,11 @@ static int __init d40_probe(struct platform_device *pdev) d40_hw_init(base); - if (np) { - ret = of_dma_controller_register(np, d40_xlate, NULL); - if (ret) - dev_err(dev, - "could not register of_dma_controller\n"); + ret = of_dma_controller_register(np, d40_xlate, NULL); + if (ret) { + dev_err(dev, + "could not register of_dma_controller\n"); + goto destroy_cache; } dev_info(base->dev, "initialized\n"); diff --git a/include/linux/platform_data/dma-ste-dma40.h b/drivers/dma/ste_dma40.h similarity index 51% rename from include/linux/platform_data/dma-ste-dma40.h rename to drivers/dma/ste_dma40.h index 10641633facc..c697bfe16a01 100644 --- a/include/linux/platform_data/dma-ste-dma40.h +++ b/drivers/dma/ste_dma40.h @@ -1,19 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) ST-Ericsson SA 2007-2010 - * Author: Per Forlin <per.forlin@xxxxxxxxxxxxxx> for ST-Ericsson - * Author: Jonas Aaberg <jonas.aberg@xxxxxxxxxxxxxx> for ST-Ericsson - */ - #ifndef STE_DMA40_H #define STE_DMA40_H -#include <linux/dmaengine.h> -#include <linux/scatterlist.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> - /* * Maxium size for a single dma descriptor * Size is limited to 16 bits. @@ -118,92 +107,4 @@ struct stedma40_chan_cfg { int phy_channel; }; -/** - * struct stedma40_platform_data - Configuration struct for the dma device. - * - * @dev_tx: mapping between destination event line and io address - * @dev_rx: mapping between source event line and io address - * @disabled_channels: A vector, ending with -1, that marks physical channels - * that are for different reasons not available for the driver. - * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW - * which avoids HW bug that exists in some versions of the controller. - * SoftLLI introduces relink overhead that could impact performace for - * certain use cases. - * @num_of_soft_lli_chans: The number of channels that needs to be configured - * to use SoftLLI. - * @use_esram_lcla: flag for mapping the lcla into esram region - * @num_of_memcpy_chans: The number of channels reserved for memcpy. - * @num_of_phy_chans: The number of physical channels implemented in HW. - * 0 means reading the number of channels from DMA HW but this is only valid - * for 'multiple of 4' channels, like 8. - */ -struct stedma40_platform_data { - int disabled_channels[STEDMA40_MAX_PHYS]; - int *soft_lli_chans; - int num_of_soft_lli_chans; - bool use_esram_lcla; - int num_of_memcpy_chans; - int num_of_phy_chans; -}; - -#ifdef CONFIG_STE_DMA40 - -/** - * stedma40_filter() - Provides stedma40_chan_cfg to the - * ste_dma40 dma driver via the dmaengine framework. - * does some checking of what's provided. - * - * Never directly called by client. It used by dmaengine. - * @chan: dmaengine handle. - * @data: Must be of type: struct stedma40_chan_cfg and is - * the configuration of the framework. - * - * - */ - -bool stedma40_filter(struct dma_chan *chan, void *data); - -/** - * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave - * (=device) - * - * @chan: dmaengine handle - * @addr: source or destination physicall address. - * @size: bytes to transfer - * @direction: direction of transfer - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - struct scatterlist sg; - sg_init_table(&sg, 1); - sg.dma_address = addr; - sg.length = size; - - return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); -} - -#else -static inline bool stedma40_filter(struct dma_chan *chan, void *data) -{ - return false; -} - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - return NULL; -} -#endif - -#endif +#endif /* STE_DMA40_H */ diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index b5287c661eb7..4c489b126cb2 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -6,8 +6,9 @@ */ #include <linux/kernel.h> -#include <linux/platform_data/dma-ste-dma40.h> +#include <linux/dmaengine.h> +#include "ste_dma40.h" #include "ste_dma40_ll.h" static u8 d40_width_to_bits(enum dma_slave_buswidth width) -- 2.39.2